Ge Fanuc IC660BBS102 ， 115 VAC / 125 VDC Isolated I/O Block with eight circuits

Ask Lasest Price
Brand Name :	GE
Model Number :	IC660BBS102
Price :	negotiable
Payment Terms :	T/T
Supply Ability :	100
Delivery Time :	5-8 work days
Certification :	CE

Add to Cart

Product Details
Company Profile

Ge Fanuc IC660BBS102 ， 115 VAC / 125 VDC Isolated I/O Block with eight circuits

Ge Fanuc IC660BBS102 , 115 VAC / 125 VDC Isolated I/O Block with eight circuits

Product Description

The IC660BBS102 is a 115 VAC / 125 VDC Isolated I/O Block with eight circuits and Failed Switch Diagnostics by GE Fanuc. The IC660BBS102 is reported to continuously withstand 250 VAC/VDC between any group or ground or between any two groups. The block has a transient rating of 2000V peak for 10 seconds. Some configuarble features include AC/DC circuit voltage, defaults for output power-ups, CPU redundancy, a selectable input filter type ranging from 10mS to 100mS, capability for output pulse test, and module control for bus switching.

The block performs diagnostic tests that detect overload and no overload, I/O power loss on pairs of circuits, over-temperature, and open wire for tristate inputs. As long as terminals 5 and 6 are recieving power, the isolated I/O block should operate. Temperatures in excess of 100°C trigger an OVERTEMPERATURE message and turns off the circuit to protect the internal electronics of the unit. The short circuit level sensor at the switching device protects the output circuits. Outputs are configured to report No-Load conditions for a new block. Genius I/O blocks are considered "open equipment" and must be installed in a protective enclosure, clean and free of airborne contaminants and with adequate cooling airflow. The block can be mounted right side up, or upside down. Leave at least 2 inches of space between blocks. The block’s mounting screws must not be used as the only means of grounding the block.

The IC660BBS102 block is fully compatible with handheld monitor IC660HHM501 and any GE Fanuc bus controller. Blocks numbered IC660CBS100, 1C660BBS100, and IC660BBS101 are backward compatible with previous versions of this Genius I/O block. Terminal assembly model IC66*TSS100E is not compatible with earlier versions of the block. During field wiring, all terminal blocks can accommodate one AWG #12 or two AWG #14 wires. Terminals labeled 1 to 4 can accommodate ring terminals measuring up to 0.27 inches. Recommended torque for all terminals is 6 inches/lb.

Technical Specifications

Rated Voltage:	115 VAC / 125 VDC
# of Points:	8
Input Voltage Range:	93 - 132 VAC
Output Voltage Range:	105 - 132 VDC
Load Current per Point:	2.0 Amps
Points per Common	Four Groups of 2

Technical Information

Specifications

Block Type:

115VAC / 125VDCIsolatedI / OBlock: Terminal Assembly Only: ElectronicsAssemblyOnly:

115VAC / 125VDCIsolatedI / OBlock,NoFailed Switch: Terminal Assembly Only:

ElectronicsAssemblyOnly:

8 ckt isolated input / output in 4 isolated pairs IC660BBS102, replaces IC660BBS100 IC660TSS100

IC660EBS100

IC660BBS103, replaces IC660BBS101 IC660TSS100

IC660EBS101

Size (height x width x depth):

Weight:

LED’s (I/O Block): LED’s (each circuit): Block to Block Isolation: HeatDissipation:

8.83” (22.44cm) x 3.50” (8.89cm) x 3.94” x (10.00cm)

4 lbs. (1.8 kg)

Unit OK, I / OEnabled On logic side of switch 1500 V

16.8W max. with 8 inputs on, 45.6W max. with 8 outputs at 2 amps

Operating Temperature Storage Temperature Humidity

Vibration

–0 to +60C (32 to +140F)

–40 C (–40 to +212F)

5% to 95% (non–condensing)

5–10 Hz 0.2” (5.08mm) displacement, 10–200 Hz at 1G

Required control power (block only):

Operating voltage (four sources): Frequency/ripple:

Power supply dropout time:

8 Wattsmaximum

93–132 VAC105–132 VDC

47–63 Hz10% max. ripple

1 cycle10mS

Input Characteristics:

Non–tristate input, OFF state:

Minimum voltage across input device (IN to H) Maximum leakage through input device

Non–tristate input, ON state:

Maximum voltage across input device (IN to H) Maximumswitchcurrent threshold

Tristate input:

OFF, acceptable voltage across input device (IN to H) ON, maximum voltage across input device (IN to H)

Input load network: Resistor to N

Capacitor to H: for blocks BBS100 and BBS101 Capacitor to H: for blocks BBS102 and BBS103

Input processing time (typical)

Selectable input filter times Inputdiagnostics

For ACFor DC

60 VRMS70 VDC

1 mA2 mA

20 VRMS35 VDC

6 mA RMS5 mA

16 VRMS–40 VRMS16 VDC–35 VDC

4 VRMS3.5 VDC

13K ohms13K ohms

.22 ïf.22 ïf

.1 ïf.1 ïf

2mS + filter0.8mS + filter

10 to 100mS in 10mS increments

Open Wire, Overtemperature, Loss of I / O Power, Failed Switch

OutputCharacteristics: Output current (steady state) Maximum inrush current Output Leakage:

Current at 0 volt output: for blocks BBS102 and 103 Current at 0 volt output: for blocks BBS100 and 101 Voltage at open output: for blocks BBS102 and 103 Voltage at open output: for blocks BBS100 and 101

Output switch (OFF to ON / ON to OFF)

Rated switching frequency at maximum inrush Turn–on delay (maximum)

Voltage drop (at 2 amps)

Voltage drop (at 20 amps inrush) Minimum load (No Load disabled)

Resistive: for blocks BBS102 and BBS103 Resistive: for blocks BBS100 and BBS101 Inductive: for blocks BBS102 and BBS103 Inductive: for blocks BBS100 and BBS101

No Load enabled threshold

Maximum block output current Fusing

Output diagnostics

For ACFor DC

2 amps2 amps resistive 9 (1 amp inductive*)

25 amps (2 cycles)25 amps (10mS peak)

7 mA2 mA

13mA2 mA

65 volts40 volts

95 volts40 volts

Zerocrossing–––

Once per secondOnce per second

0.5 Hz + 1mS1mS

2.5 volts2.5 volts

10 volts10 volts

25 mA10 mA

30 mA10 mA

40 mA10 mA

100mA10 mA

50 mA50 mA

15 amps at 35 C, 7.5 amps at 60C

Internal electronic short circuit trip. 100ms(AC), 10ms (DC) long time trip

Short Circuit, Overload, No Load, Overtemp., Loss of I / O Power.Also,

for blocks BBS100 and BBS 102 only: Failed Switch

Product Tags:

Verified Supplier

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Send your message to this supplier

*From:
Your email address is incorrect!
To: Shenzhen Wisdomlong Technology CO.,LTD
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories

Ge Fanuc IC660BBS102 ， 115 VAC / 125 VDC Isolated I/O Block with eight circuits

Ge Fanuc IC660BBS102 ， 115 VAC / 125 VDC Isolated I/O Block with eight circuits

Ge Fanuc IC660BBS102 ， 115 VAC / 125 VDC Isolated I/O Block with eight circuits

Ge Fanuc IC660BBS102 , 115 VAC / 125 VDC Isolated I/O Block with eight circuits

Product Description

Technical Specifications

Technical Information

Specifications

5V DC Digital I O Module

PLC Isolated Relay Output Module

PCM Solid State Microcomputer Module

Ge Fanuc IC660BBS102 ， 115 VAC / 125 VDC Isolated I/O Block with eight circuits

You May Like

ABB 3BSE038415R1 S800 Analog Input Output Module AO810V2 ASEA BROWN BOVER

AI810 Digital I O Module 3BSE008516R1 , AC Input Module 1x8 Channels 50V

2x8Ch Digital Input Relay Remote Input Output Module ABB 3BSE008552R1 DI811

ABB CI810B Digital I O Module 3BSE020520R1 AF100 Field Communication Interface

PM866AK02 / PM866K02 Ethernet I O Module ABB Redundant Processor Units 3BSE050199R6


*From:	Your email address is incorrect!
*To:	Shenzhen Wisdomlong Technology CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!