Elevator Lift Center Opening Safety Light Curtain For Elevator
Parts
500Hz Center Opening Safety Elevator Lift Light Curtain 100000Lux
Product Introduction
Light curtain of FE-L series elevator consists of infrared ray
launcher, receiver,power pack and special connecting cable. It
adopts automatically detecting technology; MCU controlling launcher
and receiver start sequentially; continuously scan in the car door
zone from up to down; car door system control opening or closing
operation by judging whether the infrared ray is covered or not.
Main Feature
FE-L series elevator light curtain has 40 pairs of infrared tubes;
scanning light beam reaches
194. The light curtain has much more sensitivity and reliability;
FE-L series elevator light curtain can automatically check the
elevator door open or closed.
When the door is closed, light curtain enter dormant status which
reduces energy consumption and enhances the tube life.
FE-L series elevator light curtain shortens the response time on
the premise of reliability through optimized controlling methods,
response time <=35ms.
FE-L series elevator light curtain has already pasted all
technology testing and conforms
EN12015 EN1201 6 standard. Its light resistance is much less than
100000LUX;
FE-L series elevator light permit to shielding discontinuous
multiple fault transmitters.
Technical Indicator
| Horizontal tolerance | ±3mm |
| Vertical tolerance | ±10mm |
| Angular Displacement | ±10° |
| Protection height | 20~1840mm |
| Working distance | 0~4000mm |
| Response time | ≤35ms |
| Size | 11mmx21mmx2000mm |
| Working condition | -20℃~+65℃ |
| Redundancy function | Permit to shielding discontinuous multiple fault transmitters |
| Light immunity | ≤100000Lux |
| Shaking testing | Three axles shake at random for 4 hours, shaking
frequency is 20-500Hz,sinusoid shakes for 30 minutes. |
| EMC compliance | Radiation conforms EN12015,anti-interference conforms to EN12016 |
| Power module | Input voltage220v AC土20% 4VA |
| Buzzer | when the light curtain is shielded for 15s, buzzer in the receiver
starts buzzing
to remind passengers leaving door zone |
FAQ
Q1: Is there free samples?
A: Yes,we could offer free sample if the unit price is less than
10usd, please contact me.
Q2: Customized logo on the elevator parts?
A: Yes,OEM and ODM are available for us.
But you should send us the Trademark authorization letter, there is
min order quantity.
Q3: Get the after-service?
A: We will send you the spare parts by free if the problems caused
by us.
Q4: Inspection procedures for elevator parts?
A: 100% self-inspection before packing.
Q5: Mix the 20ft container?
A: Yes,let us know your requirments please
Q6: Visit to your company before the order?
A: Sure,welcome to visit us. Our location is near by Shanghai
Hongqiao airport.
Q7: By paypal and western union or cash or CNY?
A: Yes,please contact us for detail.
Q8: Delivery time of the parts?
A: Depend on the products your asked, please contact us for detail.
Q9: How to place order?
A: 1.let us know your requirment; 2 confirm the detail we will make
proforma invoice for you; 3.send us payment and bankslip,or you
could pay on alibaba we will release work order accordingly.4.We
will send goods to you with the shipping metherd we confirmed.
