Elevator Cable for Analog Camera/IP Camera
Elevator cable for analog camera/IP camera is suitable for the
video transmission and signal control of elevator monitoring
system, and it is made of imported tensile material and outer
protected with special soft material for elevators, being flexible
and having excellent anti-jamming ability.
Installation instructions
1 Elevator cables should be freely hanging, untwisting before the
installation
2 The suspension strengthening core in the cable after stripping
should be fixed and bear tension at the same time.
3 The suspension strengthening core should keep symmetrical and
consistent tension and the deviation between tension and average
value should not be greater than 5%.
4 After the elevator car compresses the buffer, the cable shall not
contact with the pit floor and the car bottom border.
6 Trailing cables should have no knotting and wavy distortions.
6 Supporting sound return function.
7 Interfaces of video and power can' t be faulty soldering and
sealing-off, but should be fixed firmly.
Main advantages
1 More complete functions. This product breaks the drawback of previous single function,
integrating video, control and audio.
2 Humanized design. The integrated production shortens the installation time reduces
the installation cost and overcomes the phenomenon of products
easily broken in the process of installation.
3 Long transmission distance. The professional selection of conductor, insulation and shielding
fully guarantees the transmission distance of elevator cables.
4 Long suspension length. The company fully considers the suspended length in designing the
structure of products overcoming the imperfection of short
suspension length of general elevator cables, more suitable for the
use of high-rise buildings.
6 Fast moving speed. The reasonable structure, greater strength and high flexibility
make this kind of cable more suitable for running at high speed,
improving the work efficiency.
Main structural parameters
| Serial number | Performance parameters | TSTSZ-4-G3 type | TSTSZ-4-G1 type |
| Copper | Copper-clad steel |
| 1 | Approximate size of cable(mm) | 7.2x21.6 | 7.2x21.6 | 7.0 |
| 2 | Environmental temperature | -40℃ ~ +70℃ |
| 3 | Approximate weight of cable(kg/km) | 204 | 200 | 63 |
| 4 | Transmission distance(≤ m) | 100 | 300 | 300 |
| 5 | 200MHz attenuation(≤ dB/m) | 0.25 | 0.19 | 0.19 |
| 6 | Pressure of the finished (v/min) | 1500/5 | 1500/5 | 1500/5 |
| 7 | Movement speed(≤ m/s) | 5 | 8 | 8 |
| 8 | Free hanging length (≤ m) | 150 | 300 | 300 |
| 9 | Bending test | 200000 times success |
