Cat 6A Cable, Cat 6A Network Cable, UTP Cat 6A Cable with Zigzag
PVC Sheath Application
It can be applied in horizontal cabling, as the portion of a
telecommunications cabling system that extends from the work area
telecommunications outlet to the patch panels in the distribution
room, and in residential cabling that extends from the user
telecommunications outlet to the patch panels. As a crucial part of structured structured cabling, horizontal
cabling calls for higher reliability and compatibility.
TC's UTP-11 series, indoor Cat 6A unshielded cabling system, has test frequency up to 600MHZ, higher than other Cat 6A cables with industry standard of 500MHz.
In the meantime, it supports 10G Base-T applications and Power Over Ethernet (POE/POE+).
Product Features
TC's Cat 6A, 23 AWG, 4-pair, unshielded indoor cable adopts cross-type spline and serrated outer jacket, optimized to greatly enhance technical indicators, including
Attenuation, NEXT, and ANEXT, which exceed the parameters specified
in GB/T 18015.5 (IEC 61156-5) standards.
At the same time, it acts on the requirements for high transmission
in data center, and structured structured cabling in new buildings.
Application Standards
GB/T 18233 (ISO/IEC 11801); GB 50311; TIA/EIA568-C.2
Technical Details
| Transmission Performance | Cat.6A | TC |
| Frequency (MHz) | 4 | 31.25 | 62.5 | 100 | 300 | 500 | 600 |
| IL Attenuation (dB/100M) | 3.4 | 9.7 | 13.9 | 17.7 | 32.2 | 43 | 46 |
| Near End Crosstalk Attenuation (NEXT, dB) | 89.4 | 77.9 | 78 | 72.5 | 63.4 | 58.6 | 54.3 |
| NEXT Power and PS NEXT (dB) | 77.6 | 72 | 63.2 | 61.3 | 51.3 | 49.9 | 46.8 |
| Equal Level Far-end Crosstalk Attenuation (ACR-F, dB) | 88.4 | 85 | 81.5 | 79.9 | 66.3 | 52 | 48.9 |
| ACR-F Power and PS ACR-F (dB) | 77.6 | 71.5 | 64.9 | 61.3 | 51.3 | 48.4 | 43 |
| Return Loss (RL, dB) | 37.1 | 35.3 | 34.4 | 28.5 | 24.6 | 21.1 | 19.8 |
Notes: The values reflected in the table above are typically
measured, in accordance with IEC 61156-9.
| Physical Specifications |
| Conductor Size (nominal value) | 4×2×0.55 (AWG23) |
Outer Diameter of Cable (nominal
value) | 8.4mm |
Weight (305m, with package,
nominal value) | 17kg |
| Electrical Properties |
| DC resistance (20℃ ) | 93.8Ω/km |
| Earth Capacity | ≦ 5.6 nF/100m (@1kHz) |
| 100MHz Characteristic Impedance | 100Ω±15Ω |
| Transverse Conversion Loss (TCL) | ≥ 55dB-20×lgf (100-2000MHz) |
| Delay Skew | 25ns/100m |
| NVP | 69% |
| Power Over Ethernet (POE) | Enhanced Power Over Ethernet under IEEE 802.3at |
| Mechanical Properties |
| Minimum Bend Radius (dynamic) | 33mm |
| Minimum Bend Radius (static) | |
| Maximum Installation Tension | 100N |
| Anti-Extrusion Capacity | 1000N/10cm |
| Anti-Shock Capacity | ≥ 10 times |
| Installation Temperature Range | -0℃ ~+40℃ |
| Working Temperature Range | -20℃ ~+75℃ |
| Flammability (PVC) |
| PVC Flame Resistance | GB/T 18380.12 (IEC 60332-1-2) |
| Fire Rating CM | UL 1581/ UL 1666 |
| Flammability (LSZH) |
| Flame Resistance (of single wire) | GB/T 18380.12 (IEC 60332-1-2) |
| Smoke Density | GB/T 17651 (IEC 61034-1/-2) |
| Hazardous Halogen Gas | GB/T 17650.1/.2 (IEC 60754-1/-2) |
