PLC Control 5 Axis Spray Painting Machine 220V UV Paint Air
Spraying
New condition 5 Axis Spray Painting Machine and automatic spray
coating machine for plastic parts
Product Application
As we know, UV paint is more sticky than normal paint, so the paint
supply system and spray gun must be better than normal.To get a
good coating film, the automatic spraying is a good choice for you.
The machine features of five axis reciprocaing machine are as
follows.
Machine features:
1. This machine is widely used in many industry. Generally speaking
, standard type of this machine has two product tray. If you want
to buy a machine with four product tray, then you will get double
yield under the premise of high quality coating.
2. It is easy to debug the machine. You can finish debugging for
usual product in 15 minutes. The program writing of machine is
regard one plane of product as a program segment. When you finish
setting the start point , end point and the spraying speed, then
you have finished a program segment. After finish every program of
plane, then the complete program is finished.
3. This machine has continuous spraying method and step spraying
method.
4. The atomization and sector, painting output of spray gun can be
controlled by computer. When the machine begin to spray , the spray
gun can blow, in order to blow dust.
5. It is easy to use this machine ,and you can store 100 programs
of product. The machine operated by fully digital computer.
