Electrophoretic coating for car seat industry
Product Introduction
HL-1607LB/HLS-1701A Black Cationic Epoxy Electrocoat for auto is a
new generation electrophoretic coating researched and developed by
HLS Paint (Shanghai) Co., Ltd.
It represents modern technology of cathodic electrophoretic coating
that is environment-friendly with high property and low cost. Such
coating does not contain heavy metal like lead, tin, cadmium and
mercury etc. It is a two-component, water-dispersed
resin,meanwhile, it took in features of previous products, and can
adapt galvanized steel sheet perfectly, almost can be applied to
foundation coating of all metal, such as: cold and hot rolled steel
sheet, galvanized steel sheet, aluminum products and stainless
steel sheet etc.
This product features shown below:
| The bath has strong anti-shrink age andanti-pollutionability. |
| Coating fullness of good,better sub strate hiding. |
| The appearance of the coating is flat, delicate, smooth, uniform
high gloss. |
| Strong anti-corrosion properties, good salt spray resistance
workpiece edge. |
Main ingredients
Pigment:carbon black, kaolin, antirust pigment
Additives:surface active agent, prevent shrinkage cavity agent
Product quality data
| Project | Technical data | Test standard |
Resin
(HL-1607LB) | Black Paste (HLS-1701A) |
| Appearance | —— | Milky white liquid | Black viscous liquid,no agglomeration | Visual |
| pH | 25℃ | 6.0±1.0 | —— | GB/T 9724 |
| Conductivity | 25℃, μs/cm | 1400±600 | —— | HG/T 3334 |
| Storage stability |
No stratified state, and there were no obvious difference compared
to before storage | In 5-35 ℃ temperature 1 year |
Note: pH, conductivity measurement in the resin/pure water = 1:1
dilution
Customer production site:
