VRLA Rechargeable Valve Regulated Lead Acid Battery 12V 200AH
Applications of Valve Regulated Lead Acid Battery:
Solar and wind energy storage system
EPS and UPS battery backup
Signal system , emergency lighting system, security system
Telecommunication Equipment
Power plant and transmission system
Valve Regulated Lead Acid Battery Features
By combining a newly developed corrosion resistance alloy and
advanced curing process, we created a range of long life batteries-
Duration range. The range features top termination and offers 10
years design life.
1. Using oxygen recombination technology: maintenance-free.
2. Pb-Ca-Sn alloy for plate grids: less gassing and less
self-discharging.
3. High quality AGM separator: extend cycle life and prevents micro
short circuit.
4. ABS material: increases the strength of battery
container(Flame-retardant ABS is optional).
Specification of Valve Regulated Lead Acid Battery
| Type | Valve Regulated Lead Acid Battery |
| Nominal Voltage | 12Volt |
| Rated Capacity | 200Ah(10 Hr,10.8V,25℃) |
Approx Dimensions(mm) (Length×Width×Height) | L520mm x W240mm x H219mmxTH224mm |
| Battery designed life | 10 years |
| Approx Weight(kg) | 60kg |
| Applicable Temperature | -40℃～60℃ |
| Optimum Temperature | 20℃～25℃ |
| Internal Resistance | Approx. 0.0003 Ohm (fully charged @ 20°C) |
| Max. Charge Current | 50A |
| Max. Discharge Current (5S) | 1000A |
| Short Circuit Current | 4000A |
| Self-discharge | Self-discharge rate＜0.1% per day ( 20℃ ) |
| Materials for Battery Containers and Covers | ABS |
| Screw Hole Size (mm) | M8 |
Constant Currant Discharge Ratings-amperes at 25°C
| F.V/Time | 5min | 10min | 15min | 30min | 1h | 2h | 3h | 4h | 5h | 8h | 10h | 20h |
| 1.60V | 525 | 400 | 340 | 221 | 134 | 78.5 | 56.7 | 45.2 | 37.6 | 25.7 | 21.2 | 11.4 |
| 1.67V | 468 | 368 | 321 | 211 | 130 | 77.2 | 56.0 | 44.6 | 37.1 | 25.3 | 20.9 | 11.2 |
| 1.70V | 418 | 335 | 303 | 203 | 127 | 76.1 | 55.3 | 44.1 | 36.8 | 25.1 | 20.7 | 10.9 |
| 1.75V | 363 | 311 | 281 | 196 | 125 | 74.8 | 54.5 | 43.6 | 36.4 | 24.7 | 20.4 | 10.7 |
| 1.80V | 321 | 283 | 262 | 187 | 121 | 73.2 | 53.4 | 42.6 | 35.5 | 24.1 | 20.0 | 10.5 |
| 1.85V | 275 | 254 | 239 | 177 | 115 | 70.4 | 51.7 | 41.4 | 34.6 | 23.6 | 19.5 | 10.3 |
Constant Power Discharge Ratings-watts at 25°C
| F.V/Time | 5min | 10min | 15min | 30min | 1h | 2h | 3h | 4h | 5h | 8h | 10h | 20h |
| 1.60V | 923 | 718 | 621 | 408 | 249 | 133 | 96.3 | 77.1 | 64.5 | 44.5 | 36.9 | 19.9 |
| 1.67V | 835 | 669 | 589 | 392 | 244 | 131 | 95.8 | 76.5 | 64.1 | 44.1 | 36.6 | 19.6 |
| 1.70V | 754 | 614 | 562 | 380 | 240 | 130 | 95.3 | 76.3 | 64.0 | 43.9 | 36.4 | 19.3 |
| 1.75V | 664 | 577 | 527 | 370 | 237 | 129 | 94.6 | 76.1 | 63.7 | 43.7 | 36.2 | 19.1 |
| 1.80V | 595 | 530 | 496 | 357 | 232 | 128 | 93.6 | 75.0 | 62.7 | 43.0 | 35.8 | 18.9 |
| 1.85V | 518 | 483 | 457 | 340 | 224 | 124 | 91.3 | 73.5 | 61.7 | 42.3 | 35.0 | 18.5 |
Advantages
1. Good Floating Performance
12V series VRLA deep cycle batteries are produced through
internationally advanced technology and modern equipment and
designed by fully type performance test. The positive plate uses
high-tin alloy grids with strong corrosion resistance. The float
charging life of battery can reach more than 5 years.
2. Excellent over-discharge tolerance
Adopting dedicated ultra-fine glass fiber separators with high
porosity and high wet-elasticity, combining with tight assembling
technology, the battery has a high tolerance for super
over-discharge. After 5 times of over-discharges which cause the
short circuit, battery tolerance
restoration can reach more than 95%.
3. Super Cycling Ability
Special gel electrolyte additives, curing process at high
temperature and high humidity are employed to delay the softening
of active material, therefore the deep cycle endurance is improved
up to 50%, especially the anti-passivation (anti barrier layer)
capacity of positive plates during
reaction when batteries are used for small load and small current
discharge.
4. Stable Consistency
Precise,quantitative,low temperature,vacuum acid filling
method,advanced and environmentally friendly container formation
technics ensures battery stable consistency.
5. Large Current Discharge Performance
Small plate distance and high pressure tight assembly of plate
group could enhance the ability of
large current discharge performance.
6. Safety and Reliability
Our patented terminal sealing construction and the cuing process of
the adhesive at high
temperature, ensure no acid leakage from the roots of terminals,
and therefore ensure safe and
reliable operation.
7. Maintenance- free
Due to dry-type design, gas produced from the battery internal
system would all recombine and
form into water. So the VRLA battery don’t need filling water to
achieve battery maintenance-free.
8. Various installation types
The special AGM separators can absorb the electrolyte, thus there
is no free acid inside the battery,
and therefore both vertical and horizontal positions are allowed
when the battery are to be mounted.
