PLC Controlled Automatic Trapezoid Corrugated Metal Roof Ibr Sheet
Roll Forming Machine Metal Roofing Sheet Design
Description
Double Layer Roofing Tile Sheet Roll Forming Machine is a
color-coated steel plate that is cold-rolled into various
wave-shaped pressed plates. It is suitable for industrial and civil
buildings, warehouses, special buildings, roofs, walls and interior
and exterior wall decoration of large-span steel structures. It has
the characteristics of lightweight, high strength, rich color,
convenient and quick construction, anti-seismic, fireproof,
rainproof, long life and maintenance-free. It has been widely used.
Machine pictures
Profile
Specifications
| 1. | Coil Type | Pre-painted coil,Galvanized steel |
| 2. | Width | 1220mm |
| 3. | Thickness range | 0.4-0.6mm |
| 4. | Yield stress(mm) | Q235 |
1 |
Power Requirement
| Voltage | 380v/3ph/50hz |
| Main Motor power | 5.5kw |
| Cutter power | 4kw |
| 2 | Forming speed | 10-15m/min |
| 3 | Forming stations | 14 row /18 row |
| 4 | Forming shaft diameter | 75mm |
| 5 | Chains | 1 inch |
| 6 | Type of cutting | Roll formed and length-set cutting |
| 7 | Control system | PLC Delta Brand |
| 8 | Install dimension(depend on the final design) | 9.8m×1.5m×1.8m |
| 9 | Total weight (Approx) | 7.5T |
Components of line
1) Manual De-coiler
------------------------------------------------------ 1 set
2) Guiding
Device---------------------------------------------------------1
set
3) Roll Forming
System--------------------------------------------------- 1set
4) Cutting
Device----------------------------------------------------------
1set
5) Hydraulic
System------------------------------------------------------- 1 set
6) PLC Control
System----------------------------------------------------1 set
7) Run out table
----------------------------------------------------------- 1 set
Spare parts List
| No. | Item | Qty |
| 1 | Limited switch | 2 |
| 2 | Chains | 1 |
| 3 | Value | 1 |
| 4 | Relay | 1 |
| 5 | Chains Joint | 2 |
| 6 | Encoder wheels | 2 |
