5 10 15cm width 0.23mm wire dia corrugated surface stainless steel
knitted wire mesh
knitted wire mesh Description
Knitted wire mesh is known as: gas liquid filter, knitting filter,
gas and liquid, liquid gas network, in addition to the killer,
killer, killer, filler, filler wire mesh, hook into, permeability
is good, the general specifications wire diameter in 0.07-0.5 range
of flat wire or round wire, the width range, 8-1200 ㎜ single
strands of weaving, knitting etc, can also according to the need on
the screen rolled into various specifications of the corrugated.
Knitted wire mesh Technology
| Technology | The knitted Wire Mesh is a kind of silk screen woven by the knitted
needle. The diameter of the stainless steel wire mesh is usually
between 0.08mm~ 0.50mm. The width of the mesh is: 25mm, 38mm,
100mm, 150mm, 300mm, 400mm, 500mm, 550mm and 600mm.Mesh size:
2*4mm, 4*5mm, 7*mm and other types of holes, woven mesh surface
pressure on 20~45 degree Angle of 4~7mm deep ripples.
|
knitted wire mesh Characteristics
The most commonly used models of knitted Wire Mesh are 40-100,
60-150 and 140-400.With the continuous improvement of industrial
civilization, the information of knitted Wire Mesh has greatly
improved. Now the information of the wire mesh is not only the
major component used in the production of screen defoamers and
other separation projects.It is now more widely used in oil
removal, dust removal and other environmental protection occasions,
sealing, shock absorption (shock absorbers), muffling, exhaust
purification systems and air bags in the automotive industry.In the
electronic, electrical products to prevent electromagnetic
interference shielding devices are also widely used.With the
continuous development of the industrial level, the information of
the knitted Wire Mesh has revealed more and more new knowledge
about its application field and scope.
knitted Wire Mesh of Technology
1. Size of opening: from (2×3mm) to (4×5mm) and then to (12×6mm).
In addition, the size of opening can be fine-tuned according to
customer requirements.
2. the surface condition of the gas-liquid filter screen: flat
screen surface and pressed into the corrugated screen surface (the
width and depth of the corrugated has different specifications
3. The width range of the gas-liquid filter screen: 40mm, 80mm,
100mm, 150mm, 200mm, 300mm, 400, 500mm, 600mm, etc. (it is straight
tubular after being propped open)
4. the main material of the gas-liquid filter screen: stainless
steel wire SUS304, 304L, 316, 316L, 310S, pure nickel wire, pure
titanium wire, Monel, galvanized wire, wire drawing, etc.
