• Supports the following service conversions:

  64xODU0/64xODUflex/32xODU1/8xODU2<->2xOTU3/OTU3e

  8xODU2e<->2xOTU3e

  2xODU3<->2xOTU3

• Each port on the board supports a mix of ODU0, ODU1, ODU2, ODU2e, and ODUflex signals.
• The TNV1N302T01/TNU1N302T01 board supports dispersion compensation for signals received on the WDM side.

Supports the cross-connection of 64 ODU0 signals, 32 ODU1 signals, 64 ODUflex signals, 8 ODU2/ODU2e signals, or 2 ODU3 signals to/from the cross-connect board.

• Supports OTU3/OTU3e on the WDM side.
• Supports the OTN frame format and overhead processing defined by ITU-T G.709.
• OTU3 layer: supports SM overhead processing.
• ODUk (k=0, 1, 2, 3, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.

Supports ITU-T G.694.1-compliant DWDM specifications.

Supports the PRBS function on the WDM side.

TNV1N302T01:

• Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
• Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side.

TNV1N302G01:

• Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.

TNU1N302T01:

• Supports HFEC on the WDM side.

• Monitors BIP8 bytes (Bursty mode) to help locate line failures.
• Monitors parameters such as the bias current, temperature, and optical power of the laser.
• Monitors OTN alarms and performance events.

Regeneration board

The WDM-side signals from one TNV1N302T01 board can be regenerated by another TNV1N302T01/TN54NS3T01 board.

The WDM-side signals from one TNU1N302 board can be regenerated by another TNU1N302/TN55NS3/TN56NS3 board.

• Supports ODUk SNCP.
• Supports tributary SNCP protection.
• Supports intra-board 1+1 protection (when working with the OLP or DCP board).

Protocols or standards compliance

Protocols or standards for transparent transmission (non-performance monitoring)

IEEE 802.3u

IEEE 802.3z

IEEE 802.3ae

ITU-T G.707

ITU-T G.782

ITU-T G.783

GR-253-CORE Synchronous Optical Network (SONET) Transport Systems: Common Generic

NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI)

NCITS FIBRE CHANNEL LINK SERVICES (FC-LS)

NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2)

NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3)

NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3)

NCITS FIBRE CHANNEL - PHYSICAL AND SIGNALING INTERFACE (FC-PH)

NCITS FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS-2 MAPPING PROTOCOL (FC-SB-2)

SMPTE 292M Bit-Serial Digital Interface for High-Definition Television Systems

ETSI TR 101 891 Professional Interfaces: Guidelines for the implementation and usage of the DVB Asynchronous Serial Interface (ASI)

SMPTE 259M 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital Interface

NCITS SBCON Single-Byte Command Code Sets CONnection architecture (SBCON)

ANSI X3.139 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Media Access Control (MAC)

ANSI X3.148 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Physical Layer Protocol (PHY)

ANSI X3.166 Information Systems - Fiber Distributed Data Interface (FDDI) Physical Layer Medium Dependent (PDM)

Protocols or standards for service processing (performance monitoring)

ITU-T G.805

ITU-T G.806

ITU-T G.709

ITU-T G.872

ITU-T G.7710

ITU-T G.798

ITU-T G.874

ITU-T M.3100

ITU-T G.874.1

ITU-T G.875

ITU-T G.808.1

ITU-T G.841

ITU-T G.8201

ITU-T G.873.1

ITU-T G.694.1

OTU3: OTN service at a rate of 43.02 Gbit/s

OTU3e: OTN service at a rate of 44.57 Gbit/s

• Supports OTU3/OTU3e on the WDM side.
• Supports the OTN frame format and overhead processing defined by ITU-T G.709.
• OTU3 layer: supports SM overhead processing.
• ODU3 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.

Supports ITU-T G.694.1-compliant DWDM specifications.

TNV1N302T01:

• Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
• Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side.

TNU1N302T01:

• Supports HFEC on the WDM side.

• Monitors BIP8 bytes (Bursty mode) to help locate line failures.
• Monitors parameters such as the bias current, temperature, and optical power of the laser.
• Monitors OTN alarms and performance events.

Protocols or standards compliance

Protocols or standards for transparent transmission (non-performance monitoring)

-

Protocols or standards for service processing (performance monitoring)

ITU-T G.805

ITU-T G.806

ITU-T G.709

ITU-T G.872

ITU-T G.7710

ITU-T G.798

ITU-T G.874

ITU-T M.3100

ITU-T G.874.1

ITU-T G.875

ITU-T G.808.1

ITU-T G.841

ITU-T G.8201

ITU-T G.694.1

800 ps/nm-C Band-Tunable Wavelength-DQPSK-PIN

40 Gbit/s Multirate-2 km

60000 ps/nm-C Band-Tunable Wavelength-ePDM-BPSK