| Basic function | Supports the following service conversions: - 10x10GE LAN/10GE
WAN/STM-64/OC-192/OTU2/FC800/FICON8G<->10xODU2
- 10x10GE LAN/OTU2e/FC1200<->10xODU2e
- 10xFC800/FICON8G<->10xODUflex
|
| Client-side service type | STM-64/OC-192: SDH/SONET service at a rate of 9.95 Gbit/s 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s 10GE WAN: Ethernet service at a rate of 9.95 Gbit/s OTU2: OTN service at a rate of 10.71 Gbit/s OTU2e: OTN service at a rate of 11.1 Gbit/s FC800: SAN service at a rate of 8.5 Gbit/s FICON8G: SAN service at a rate of 8.5 Gbit/s FC1200: SAN service at a rate of 10.51 Gbit/s |
| Cross-connect capabilities | Supports backplane cross-connections of 10 ODU2/ODU2e/ODUflex
signals from/to the cross-connect board. |
| OTN function | - Supports overhead processing defined by ITU-T G.709. The service
mapping process complies with ITU-T G.709 and G.Sup43.
- ODU2 layer: supports PM and TCM overhead processing, and
non-intrusive monitoring of PM and TCM overheads.
- ODUflex layer: supports PM overhead processing.
- OTU2 layer: supports SM overhead processing.
|
| ESC function | Supported when the client-side service type is OTU2 or OTU2e. |
| PRBS test function | Supports the PRBS function on the client side. NOTE:The PRBS function on the client side is supported only when the
client-side service type is STM-64/OC-192, OTU2 or OTU2e. |
| LPT function | Supported only when the client-side service type is 10GE LAN. |
| FEC coding | Supports ITU-T G.709-compliant forward error correction (FEC) on
the client side when the client-side service type is OTU2 or OTU2e. |
| Alarms and performance events monitoring | - Monitors BIP8 bytes (Bursty mode) to help locate line failures.
- Monitors B1 bytes to help locate faults.
- Monitors OTN alarms and performance events.
- Monitors parameters such as the bias current, temperature, and
optical power of the laser.
- Supports the remote monitoring (RMON) of Ethernet services (10GE
LAN).
|
| ALS function | Supports the ALS function on the client side when client services
are non-OTN services. |
| Test frame | SupportedNOTE:Supports this function when receiving 10GE LAN services on the
client side and Port Mapping is set to MAC Transparent Mapping
(10.7G). |
| Electrical-layer ASON | Supported |
| Latency measurement | The board supports latency measurement. The bidirectional latency
at the ODUk layer between two tributary boards supporting the
latency measurement function can be measured, and the latency data
is displayed on the U2000.NOTE:This function is not supported when the client-side service type is
OTU2/OTU2e. |
| IEEE 1588v2 | The V1T210 board supports the TC, TC+OC, BC, and OC modes when the
client-side service type is 10GE LAN and the Port Mapping is MAC
Transparent Mapping (10.7 G).NOTE:TNV1T210:Only ports 1-4 support IEEE 1588v2. |
| Physical clock | 10GE LAN, Bit Transparent Mapping (11.1 G) | 10GE LAN, MAC Transparent Mapping (10.7 G) |
| Supports synchronous Ethernet transparent transmission | Supports synchronous Ethernet processingNOTE:TNV1T210:Only ports 1-4 support synchronous Ethernet processing. |
| Protection scheme | - Supports ODUk SNCP (k=2, 2e, flex).
- Supports client 1+1 protection.
- Supports tributary SNCP protection.
NOTE:When the cross-connect granularity is ODUflex, the board does not
support tributary SNCP protection. The board supports tributary SNCP protection only when the
client-side service type is OTN, SDH or SONET. |
| Ethernet service mapping mode | Supports Bit Transparent Mapping (11.1G) and MAC transparent
mapping (10.7G) when the client-side service type is 10GE LAN. |
| Port MTU | The value ranges from 1518 to 9600, in bytes. That is, the maximum
size of the supported Jumbo frame is 9600 bytes. NOTE:when Port Mapping is set to Bit Transparent Mapping (11.1G),
Maximum Packet Length is unavailable on the U2000. |
| Loopback | Client side | Inloop | Supported |
| Outloop | Supported |
| ODUk Inloop | Supported |
| ODUk Outloop | Supported |
NOTE:The board supports ODUk inloop and ODUk outloop only when non-OTN
services are received and the port working mode is non-convergence. If the port working mode is set to ODUflex non-convergence mode (Any->ODUflex), the board supports ODUk inloop and ODUk outloop only when
bidirectional cross-connections are configured. |
Protocols or standards compliance | Protocols or standards for transparent transmission
(non-performance monitoring) | ITU-T G.707 ITU-T G.782 ITU-T G.783 GR-253-CORE Synchronous Optical Network (SONET) Transport Systems:
Common Generic NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI) NCITS FIBRE CHANNEL LINK SERVICES (FC-LS) NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2) NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3) NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3) NCITS FIBRE CHANNEL - PHYSICAL AND SIGNALING INTERFACE (FC-PH) NCITS FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS-2 MAPPING
PROTOCOL (FC-SB-2) |
Protocols or standards for service processing (performance
monitoring) | ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841 ITU-T G.8201 ITU-T G.873.1 ITU-T G.694.1 |
DHL
Fedex
By Sea
Notice:
Deliver to port:
Deliver to door:
100% Low Price Guarantee:
100% Quality Assurance:
Free Technical Support:
100% Money Back Guarantee:
Flexible Secure Payment & Shipment:
