The LQG board is mainly used to achieve wavelength tunable and
cross-connect at the electrical layer, and to provide OTN
interfaces and ESC.
For detailed functions and features, refer to Table 1.
Table 1 Functions and features of the LQG board
Function and Feature
Description
Basic function
LQG converts signals: 4 x GE <-> 1 x OTU5G/FEC5G
Client-side service type
GE: Ethernet service at a rate of 1.25 Gbit/s
Cross-connect capabilities
OptiX OSN 6800: Supports the grooming of four channels of GE
services each to working/protection cross-connection boards
respectively through the backplane, and supports the transmission
of four GE signals to the paired slots through the backplane.
OptiX OSN 3800: Supports the grooming of four GE signals from one
board of the mesh group (consisting of four boards) to the other
three boards belonging to the mesh group.
Supports the tunable wavelength optical module. Equipped with this
module, the board can tune the optical signal output on the WDM
side within the range of the 40 wavelengths in C-band with the
channel spacing of 100 GHz.
ESC function
Supported
PRBS test function
Supports the PRBS function on the WDM side.
LPT function
Supported
FEC coding
Supports ITU-T G.709-compliant forward error correction (FEC) on
the WDM side.
Alarms and performance events monitoring
Monitors BIP8 bytes (Poisson mode) to help locate line failures.
Monitors B1 bytes to help locate faults.
Monitors OTN alarms and performance events.
Monitors parameters such as the bias current, temperature, and
optical power of the laser.
Supports the remote monitoring (RMON) of Ethernet services.
ALS function
Supports the ALS function on the client side.
Test frame
Supported
Latency measurement
Not supported
Optical-layer ASON
Not supported
Electrical-layer ASON
Not supported
Protection scheme
Supports SW SNCP.
Supports client 1+1 protection.
Supports intra-board 1+1 protection (when working with the
OLP/DCP/QCP board).
Supports OWSP protection.
Supports MS SNCP protection.
Ethernet service mapping mode
Supports encapsulation of GE services in GE(GFP-F) (displayed as GE
on the NMS) and GE(GFP-T) modes.
Ethernet port working mode
GE(GFP-F): 1000M Full-Duplex, Auto-Negotiation
Port MTU
The value ranges from 1518 to 9600, in bytes. That is, the maximum
size of the supported Jumbo frame is 9600 bytes.
Loopback
WDM side
Inloop
Supported
Outloop
Supported
Client side
Inloop
Supported
Outloop
Supported
Protocols or standards compliance
Protocols or standards for transparent transmission
(non-performance monitoring)
IEEE 802.3z
Protocols or standards for service processing (performance
monitoring)
ITU-T G.805
ITU-T G.806
ITU-T G.709
ITU-T G.872
ITU-T G.7710
ITU-T G.798
ITU-T G.874
ITU-T M.3100
ITU-T G.874.1
ITU-T G.875
ITU-T G.808.1
ITU-T G.841
ITU-T G.8201
ITU-T G.694.1
ITU-T G.694.2
Mechanical Specifications
Dimensions of front panel (H x W x D): 264.6 mm (10.4 in.) x 25.4
mm (1.0 in.) x 220 mm (8.7 in.)
Weight: 1.3 kg (2.9 lb.)
Power Consumption
Board
WDM-Side Optical Module
Typical Power Consumption (W)
Maximum Power Consumptiona (W)
TN11LQG
3400 ps/nm-C Band-Fixed Wavelength-NRZ-APD
28.4
32
3400 ps/nm-C Band-Tunable Wavelength-NRZ-APD
31.0
34.4
5 Gbit/s Multirate (CWDM)-50 km-eSFP
5 Gbit/s Multirate (CWDM)-70 km-eSFP
23.18
26
a: The maximum power consumption is the power consumed by the board
when it works normally under the highest ambient temperature.
Delivery
Cargo will be delivered within 1 day after payment arrived.
Tracking Number will be offered once delivery done.
Delivery Options
Estimated Delivery Time
DHL
3-5 business days
Fedex
3-5 business days
By Sea
10-20 business days
Notice:
Above mentioned information are just for your reference only,we
will keep you posted for the tracking delivery schedule.There are
two delivery options available for by air and by sea:
Deliver to port:
Uonel is responsible for transporting goods to port. All subsequent
customs and transportation fees are the responsibility of the buyer. Uonel will recommend trustworthy local
freight forwarders to you.Uonel can facilitate the progress under
buyer's permission and at buyer's expense.
Deliver to door:
Uonel will quote all destination charge prior once we have
confirmed order. Uonel is responsible for transporting goods to door after you have
made the payment.
If your products failed, you must contact your sales representative
to verify product failure. If the problem still can't correct by
remote support methods i.e. email or phone support, the RMA
procedure will issue.
Company Profile
Uonel is one of the biggest Network Hardware distributor in china,
founded in 2008. We are a global provider of netwotking products
with more than 5000 customers.
We provide original new Routers,Switches,Firewalls,Wireless APs &
controllers,OLTs,GPON modems,optical transceivers.Our company have
more than $5million products in stock.
Most of our technical engineers had work exprience in company,we
can provide network
design&planning,configration,troubleshooting,maintenance and
training service in world wide.
Shenzhen Uonel Technology Co., Ltd. is a Global Provider of
Telecommunication Equipment and Services. We buy&sell Original NEW&REF telecom equipment from
carriers and market to other companies who need them. We offer carrier class telecommunication hardware at 80-90% OFF
list. We provide network design&planning, configration,
troubleshooting, maintenance and training service in world wide.
Uonel Products& Stock
More than $5million Huawei ZTE Juniper Cisco products in stock. Delivery your order within 72hours base on quick response ability. Focus on High-end telecom products including IP
Data,Transmission,Wireless,Server&Storage and spare parts.
DHL
Fedex
By Sea
Notice:
Deliver to port:
Deliver to door:
100% Low Price Guarantee:
100% Quality Assurance:
Free Technical Support:
100% Money Back Guarantee:
Flexible Secure Payment & Shipment:
