Yellow 2 PIN Polyswitch Fuse PPTC PTC Self Recovery Fuse 16V 5 AMP
Resettable Automotive Fuse
16V Resettable Fuse
Current: 0.05A-14A
Voltage: 16V
Certificate: RoHS, Reach, HF compliance
Features Of 16V Resettable Fuse
◆ Radial Leaded Devices
◆ Cured, flame retardant epoxy polymer insulating material meets UL
94V-0 requirements
◆ Bulk Package, or tape and reel available on most models
◆ UL(Pending), C-UL(Pending), TUV(R50322003)
◆ RoHS, Reach, HF compliance
Applications of 16V Self Recovery Fuse
Almost anywhere there is a low voltage power supply, up to 16V and
a load to be protected, including:
◆ Personal computer
◆ Toys
◆ Medical electronics
◆ Personal care product
| P/N | A | B | C | D | E | Physical characteristics |
| Max. | Max. | Typ. | Min. | Max. | Style | Lead(mm) | Material |
| TRA005 | 5.7 | 10.5 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA010 | 5.7 | 10.5 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA017 | 5.7 | 10.5 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA020 | 5.7 | 10.5 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA025 | 5.7 | 10.5 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA030 | 5.7 | 10.5 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA040 | 5.7 | 10.5 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA050 | 5.7 | 10.5 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA065 | 6.5 | 13.2 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA075 | 6.5 | 13.2 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA090 | 7.4 | 13.0 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA110 | 7.4 | 13.0 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA120 | 7.4 | 13.0 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA135 | 9.4 | 14.5 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA160 | 9.4 | 14.5 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA185 | 9.4 | 14.5 | 5.1 | 7.6 | 3.1 | 1 | 0.50 | CP |
| TRA200 | 10.7 | 16.7 | 5.1 | 7.6 | 3.1 | 1 | 0.60 | CU |
| TRA250 | 10.7 | 16.7 | 5.1 | 7.6 | 3.1 | 1 | 0.60 | CU |
| TRA300 | 10.7 | 16.7 | 5.1 | 7.6 | 3.1 | 1 | 0.60 | CU |
| TRA400 | 11.5 | 17.9 | 5.1 | 7.6 | 3.1 | 1 | 0.60 | CU |
| TRA500 | 13.0 | 18.3 | 5.1 | 7.6 | 3.1 | 2 | 0.80 | CU |
| TRA600 | 13.0 | 18.3 | 5.1 | 7.6 | 3.1 | 2 | 0.80 | CU |
| TRA700 | 16.3 | 21.3 | 5.1 | 7.6 | 3.1 | 2 | 0.80 | CU |
| TRA800 | 17.8 | 22.9 | 5.1 | 7.6 | 3.1 | 2 | 0.80 | CU |
| TRA900 | 21.3 | 26.4 | 5.1 | 7.6 | 3.1 | 2 | 0.80 | CU |
| TRA1000 | 21.3 | 26.4 | 5.1 | 7.6 | 3.1 | 2 | 0.80 | CU |
| TRA1100 | 20.8 | 29.8 | 10.2 | 7.6 | 3.1 | 2 | 0.80 | CU |
| TRA1200 | 20.8 | 29.8 | 10.2 | 7.6 | 3.1 | 2 | 0.80 | CU |
| TRA1300 | 24.2 | 32.9 | 10.2 | 7.6 | 3.1 | 2 | 0.80 | CU |
| TRA1400 | 24.2 | 32.9 | 10.2 | 7.6 | 3.1 | 2 | 0.80 | CU |
Specification Of 16V Resettable PTC Fuses
| P/N | Ihold | Itrip | Vmax | Imax | Maxi operating time | Pd | Resistance range(Ω)) |
| IH(A) | IT(A) | Vmax(V) | Imax(A) | (A) | (Sec) | Pd typ(W) | R min | R max | R1 max |
| TRA005 | 0.05 | 0.10 | 16 | 40 | 0.25 | 5.0 | 0.26 | 8.00 | 11.50 | 17.00 |
| TRA010 | 0.10 | 0.20 | 16 | 40 | 0.50 | 4.0 | 0.35 | 2.00 | 4.50 | 6.70 |
| TRA017 | 0.17 | 0.34 | 16 | 40 | 0.85 | 3.0 | 0.36 | 0.980 | 1.800 | 2.700 |
| TRA020 | 0.20 | 0.40 | 16 | 40 | 1.00 | 3.0 | 0.36 | 0.780 | 1.600 | 2.200 |
| TRA025 | 0.25 | 0.50 | 16 | 40 | 1.25 | 3.0 | 0.36 | 0.500 | 1.100 | 1.650 |
| TRA030 | 0.30 | 0.60 | 16 | 40 | 1.50 | 3.0 | 0.36 | 0.350 | 0.700 | 1.050 |
| TRA040 | 0.40 | 0.80 | 16 | 40 | 2.00 | 3.0 | 0.40 | 0.230 | 0.650 | 0.970 |
| TRA050 | 0.50 | 1.00 | 16 | 40 | 2.50 | 3.0 | 0.45 | 0.170 | 0.400 | 0.810 |
| TRA065 | 0.65 | 1.30 | 16 | 40 | 3.25 | 3.0 | 0.45 | 0.110 | 0.300 | 0.450 |
| TRA075 | 0.75 | 1.50 | 16 | 40 | 3.75 | 3.0 | 0.54 | 0.080 | 0.230 | 0.260 |
| TRA090 | 0.90 | 1.80 | 16 | 40 | 4.50 | 3.2 | 0.54 | 0.070 | 0.180 | 0.210 |
| TRA110 | 1.10 | 2.20 | 16 | 40 | 5.50 | 4.0 | 0.54 | 0.045 | 0.140 | 0.170 |
| TRA120 | 1.20 | 2.40 | 16 | 40 | 6.00 | 4.0 | 0.54 | 0.040 | 0.120 | 0.160 |
| TRA135 | 1.35 | 2.70 | 16 | 40 | 6.75 | 4.0 | 0.54 | 0.035 | 0.100 | 0.140 |
| TRA160 | 1.60 | 3.20 | 16 | 40 | 8.00 | 4.5 | 0.54 | 0.030 | 0.100 | 0.110 |
| TRA185 | 1.85 | 3.70 | 16 | 40 | 9.25 | 4.5 | 0.54 | 0.030 | 0.080 | 0.100 |
| TRA200 | 2.00 | 4.00 | 16 | 40 | 10.0 | 5.0 | 0.90 | 0.020 | 0.060 | 0.90 |
| TRA250 | 2.50 | 5.00 | 16 | 40 | 12.5 | 5.0 | 0.90 | 0.015 | 0.050 | 0.070 |
| TRA300 | 3.00 | 6.00 | 16 | 40 | 15.0 | 4.0 | 0.90 | 0.010 | 0.040 | 0.055 |
| TRA400 | 4.00 | 8.00 | 16 | 40 | 20.0 | 3.0 | 1.35 | 0.010 | 0.030 | 0.045 |
| TRA500 | 5.0 | 10.0 | 16 | 100 | 25.0 | 5.0 | 2.6 | 0.009 | 0.027 | 0.033 |
| TRA600 | 6.0 | 12.0 | 16 | 100 | 30.0 | 7.0 | 2.8 | 0.007 | 0.021 | 0.031 |
| TRA700 | 7.0 | 14.0 | 16 | 100 | 35.0 | 8.0 | 3.0 | 0.006 | 0.015 | 0.020 |
| TRA800 | 8.0 | 16.0 | 16 | 100 | 40.0 | 9.0 | 3.0 | 0.004 | 0.013 | 0.018 |
| TRA900 | 9.0 | 18.0 | 16 | 100 | 45.0 | 12.0 | 3.3 | 0.003 | 0.012 | 0.016 |
| TRA1000 | 10.0 | 20.0 | 16 | 100 | 50.0 | 12.5 | 3.7 | 0.002 | 0.011 | 0.015 |
| TRA1100 | 11.0 | 22.0 | 16 | 100 | 55.0 | 13.5 | 3.7 | 0.002 | 0.010 | 0.013 |
| TRA1200 | 12.0 | 24.0 | 16 | 100 | 60.0 | 15.0 | 4.2 | 0.002 | 0.009 | 0.012 |
| TRA1300 | 13.0 | 26.0 | 16 | 100 | 65.0 | 18.0 | 4.2 | 0.002 | 0.008 | 0.011 |
| TRA1400 | 14.0 | 28.0 | 16 | 100 | 70.0 | 20.0 | 4.2 | 0.002 | 0.008 | 0.011 |
Precautions For Use The 16V PPTC PTC Fuse
1) Welding: During welding, it should be noted that PTC thermistors
should not be damaged by excessive heating, which will cause the
change of resistance value under severe lead welding conditions. It
is recommended to carry out test confirmation first under high
temperature and long time welding conditions.
2) Coating and others: When coating PTC thermistors, the materials
must be chemically neutral and shall not exceed the upper limit
temperature of 120℃ of PTC thermistors during curing, otherwise
resistance changes and loss of electrical properties will be
caused. It is not allowed to apply external force, such as binding,
on the body part of PTC element.Please make special requests to us.
3) Cleaning: Some cleaning agents may damage the performance of
thermistors, it is best to test or consult our company before
cleaning.
4) Storage conditions and period: If properly stored, there is no
time limit for the storage period of PTC thermistors.In order to
maintain the weldability of PTC thermistors, storage should be
carried out in an atmosphere free from erosion, and attention
should be paid to air humidity, temperature and container
materials.Components should be stored as far as possible in their
original packaging. Contact with the metal cladding of an unwelded
PTC thermistor may result in reduced weldability. Some
specifications may change when exposed to excessive moisture or
temperature, such as solderability of tin lead, but can be stored
for a long time under normal storage conditions of electrical
components.
5) Precautions: In order to avoid the failure/short circuit/burning
out of PTC thermistor, special attention should be paid to the
following matters when using PTC thermistor:
Do not use (test) PTC thermistors in oil or water or in flammable
or explosive gases.
Do not use PTC thermistors beyond "maximum operating current" or
"maximum operating voltage".
Technical Equipment Of 16V Polyswitch Fuse
