Finished Surface Cylinder Hydraulic Breaker Piston For MSB MS450
Hydraulic Breaker Piston Cylinder Piston
1. What factors affect a hydraulic hammer’s power?
The power of the hydraulic hammer is affected mainly by three
factors: nitrogen pressure (back head pressure), hydraulic flow,
and impact rate.
The amount of nitrogen is very specific; overcharging the nitrogen
will make it stop hammering, while low nitrogen pressure results in
weak hammering.
Hydraulic flow directly affects working pressure. Over-flow can
damage the hammer very quickly, so be sure to work within the
proper hydraulic range.
There is a frequency valve on the cylinder body responsible for the
impact rate. Adjust it manually according to working conditions.
Basically, under certain working conditions, a slower impact rate
leads to a more powerful impact, and higher frequency means a
lighter blow.
2. How often does the seal kit need to be replaced?
It depends on working conditions, makes, and age. We recommend
every three months.
3. Can a broken piston be repaired?
No, a broken hydraulic hammer piston can never
Crack reason of Chisel and Piston
Thrust&outer bushing worn
Chisel and piston crack reasons:
thrust& outer bushing wear greatly( s 10mm) partial hit for long
time, beard uneven,please replace the thrust&outer bushing
Piston needs to be repaired or replaced
Chisel and piston crack reasons:
the piston hits the chisel for long time, causing piston surface
worn and concave, so it can not coincide with the tail of chisel,
Please repair the piston. Normal use
