Cost-Effective And Contactless Solution Pedestrian Entry Or Exit
Flap Barrier Gate
PRODUCT DESCRIPTION
Sinomatic Flap turnstile is a cost-effective and contactless
solution to control pedestrian entry or exit in restricted
areas.
With relatively high open/close speed, normally 30-35 persons per
minutes, it usually used in high pedestrian traffic
flow sites.
The top cover is with angular slant design and the whole cabinet
body is made of full brushed stainless steel, so it’s
more easy to cut space to integrate with different third-party
access controller or device (e.g.: RFID, Biometric reader
device, Display, Counter, Reader, Push button, Card collector, Coin
insert, Barcode/QR reader).
Arm material is Plexiglas/acrylic glass or red/blue rubber
The model is with two types LED indicators: the front cabinet one
is for passageway indication, while the top cover
one is to shows the current working mode (open/close).
PRODUCT APPLICATION
1. The station, wharf, tourist attraction, entrance and exit
management channel of factory
2. Recount channel management of exhibition, swimming pool, etc
3. Time attendance, access control, consumption management for
enterprise or business buildings
4. Special channel management system
PRODUCT FUNCTION AND FEATURES
1.With fault self-test and alarm prompt function, convenient for
user maintenance and use.
2.Through the built-in small push-pull on the main control board,
device operating state can be programed.
3.The mechanical structure has anti-pinch and anti-collision
function. When the swing arm is blocked during the
reset process, the motor automatically stops working within the
specified time. Reset again after the default delay
(until reset), and the force is very small (≤ 2kg).
4. Illegal intrusion, trailing alarm, reverse intrusion gate
automatically closes
5.Anti-shock function, the arm is automatically locked when no open
signal is received.
6.Telescopic arms are adjustable synchronously (for double
pendulum)
7.With automatic reset function. After the switch is opened, the
system will automatically cancel the user's
permission for the pass when there is no pass within the specified
time.The reset time is adjustable from 1s to 60s
(the system default time is 10s). After the power is cut off, the
channel is automatically opened (in accordance with
fire protection requirements), and the power-on channel is
automatically closed.
8.Infrared sensor reset, infrared sensor anti-trap function
(configure 5 pairs of infrared)
9.It can be connected with a variety of devices such as access
control systems, consumer systems, electronic
ticket systems, biometric systems, and electrostatic testers.
10.The one-way or two-way control personnel can enter and exit, and
the infrared sensing in and out channels.
11.Voice prompt function.
12.Remote control and management can be achieved directly through
the management computer.
PRODUCT SPECIFICATIONS
Power supply | AC220±10%V 50Hz/AC110±10% 60Hz |
Motor voltage | DC 24V |
Access device input voltage | Dry contact or 12V electrical level signal or > 100ms 12V
impulse signal, driving current > 10mA |
Direction | Can be set as single or double |
Max flow rate | 25 to 30 person per minute |
Flap openning/closing time | 1s |
Flap lenght | 270mm |
Flap material | Acrylic or foam |
Working temperature | -20°C~+60°C |
Working humidity | 0~95%RH |
Application | Indoor/ outdoor with tent |
WHY CHOOSE US
1. Our Factory has more than 20 years OEM/ODM experiences in the
line of access control turnstile and barrier.
2. Prompt delivery time. Usually we keep stock of standard model
which ensure the prompt delivery.
3. We accept OEM/ODM orders to meet the requirements of clients.
4. Trial order is acceptable. Clients can buy sample order and test
it before bulk order.
5. Online technical support makes it carefree to be our business
partner.
6. A variety of transportation for your choice. Sea shipment, air
cargo or express, depends on your demand.
7. Factory can be visited on working days. Clients are warmly
welcome to visit our factory.
