Busbar Riveter for Riveting The Busbar Trunking System

With the development of the industrial technology, Kiande developed the riveting machines to realize the connection instead of original connection by bolts, welding or glues between metals, metal and nonmetal, and nonmetal and nonmetal thin sheets. This kind of connection will have strong strength and improve the working efficiency and safety. No drilling operation will help to avoid the process of removing the drilling chips, deburring and etc.

1. Workmanship description
   The riveting machine is to connect two or above parts together by the high voltage Hydraulic press system. The system will use the strong push and high speed to connect the parts and rivet forming will be by achieved by the down molds.
2. Advantages
   2.1 No need drilling which will avoid the cleaning process and do not worry the waste chips will make scratches which will create the surface defects.
   2.2 Connection strength is the same with that of welding and stronger than that of glue. This connection has solved the difficulties that non-ferrous metals
   2.3 Material will not be deformed which optimize the product surface.
   2.4 Single working procedure improves working efficiency.
   2.5 Low operation cost and low energy consumption.
   2.6 No need to invest on environmental protection.
3. Equipment technical parameter
   3.1 Type: KD-MJQ
   3.2 Main oil pressure:25bar
   3.3 Opening distance:50mm
   3.4 Normal working pressure:20bar
   3.5 Total power:6000*1200*2800mm
   3.6 Oil pipe length:10m
   3.7 C type pliers opening depth:120mm
4.