CAS:31795-24-1
DESCRIPTION
H-102KExcellent water resistant, reduce water absorption into the
substrate, thus reducing spalling due to freeze-thaw and
efflorescence, thereby increasing the life of the materials.
Colorless and non-yellowing protection, preserve the natural
appearance of the substrate.
Penetrating and breathable , low VOC.
TYPICAL PROPERTIES
Appearance | Clear solution |
Solid Content | 42% or 52% |
Density(g/cm3): | 1.4 |
Diluter: | Water |
Active content: | Approx 28% |
K20 equivelent | 20%±0.1 |
USES AND APPLICATION
H-102KIt is clear water-dilutable potassium/sodium methyl siliconate
solution. As a surface treatment in applications that utilize its
ability to impart a water repellent surface and reduce water
absorption. Designed to impart water repellency to a wide variety
of substances,such as sandstone, limestone, marble, granite and
bricks, ceramics,gypsum and gypsum-based plasterboard, light
fillers etc.
Dosage:
Cement mortar, concrete: ( H-102K: water = 1: 4-10 diluted, mix to
cement mortar or concrete)
Masonry: ( H-102K: water = 1: 15-20 diluted, soak masonry 15-20
minutes)
Building surface: (H-102K: water = 1: 4-10 diluted ,brush directly
to the surface of the building)
The siliconate reacts with carbon dioxide (CO2) in the air to form
an insoluble water-resistant treatment within 24 hours.
It is also particularly effective in preventing humidity from
rising within walls(rising damp). For this application the product
is injected into the walls.
SAFETY
Before handling, read the Material Safety Data Sheet and container
label for safe use, physical and health hazard information.
STORAGE AND SHELF LIFE
After sealing packaging products stored in a cool, dry place , H-102Khas a shelf life of 36 months from date of manufacture.
PACKAGING
H-102K is available in 200L drum and 1000L IBC or others.
