Juniper Networks EX-SFP-10GE-ER40 1310nm 40km DOM LC SMF 10G SFP+
Transceiver Module
Descriptions
This transceivers are designed for use in 10-Gigabit Ethernet links
up to 40km over G.652 SingleMode fiber. They are compliant with
SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-ER/EW. The transceiver
designs are optimized for high performance and cost effective to
supply customers the best solutions for telecommunication and
datacom.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Operating Wavelength | λ | 1530 | | 1570 | nm | |
| Ave. output power (Enabled) | PAVE | -2 | | 4 | dBm | 1 |
| Side-Mode Suppression Ratio | SMSR | 30 | | | dB | |
| Extinction Ratio | ER | 4 | | | dB | |
| RMS spectral width | Δλ | | | 1 | nm | |
| Dispersion penalty | TDP | | | 4 | dB | |
| Relative Intensity Noise | RIN | | | -128 | dB/Hz | |
| Output Optical Eye | Compliant with IEEE 0802.3ae |
| Receiver |
| Operating Wavelength | | 1260 | | 1600 | nm | |
| Receiver Sensitivity @10.3G | | | | -16 | dBm | 2 |
| Path Penalty | PP | | | 2 | dB | |
| Overload | PAVE | | | +0.5 | dBm | |
| LOS Assert | Pa | -30 | | | dBm | |
| LOS De-assert | Pd | | | -18 | dBm | |
| LOS Hysteresis | Pd-Pa | 0.5 | | | dB | |
Notes:
1. Measured with worst ER=5dB
2. PRBS 231 – 1 and BER<10-12.
Features
● Supports 9.95 to 11.3Gb/s bit rates
● Duplex LC connector
● Hot pluggable SFP+ footprint
● Uncooled 1310nm DFB transmitter, PIN photo-detector
● Applicable for 40km SMF connection
● Low power consumption, < 1.3W
● Digital Diagnostic Monitor Interface
● Optical interface compliant to IEEE 802.3ae 10GBASE-ER
● Electrical interface compliant to SFF-8431,SFF-8432
● Operating case temperature: Commerical:0 to 70 °C
Product Applications
● 10GBASE-ER/EW at 10.3125Gbps
● OTN G.709 OTU1e/2/2e
● 4x, 8x and 10x 10G Fiber Channel
● Other optical links
