SFP-10G-ER40 Compatible Arista Networks 10G SFP+ 1310nm 40km Transceiver

SFP-10G-ER40 Compatible Arista Networks 10G SFP+ 1310nm 40km Transceiver

Descriptions

SFP-10G-ER40 compatible Arista Networks 10G SFP+ 1310nm 40km transceiver are designed for use in 10G Ethernet links up to 40km. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-ER/EW.

Absolute Maximum Ratings

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

General Operating Characteristics

Features

● Supports 9.95 to 11.3Gb/s bit rates

● Hot pluggable SFP+ footprint

● Uncooled 1310nm DFB transmitter, PIN photo-detector

● Low power consumption, < 1.3W

● Digital Diagnostic Monitor Interface

● Optical interface compliant to IEEE 802.3ae 10GBASE-ER

● Electrical interface compliant to SFF-8431,SFF-8432

● Operating case temperature: Commerical:0 to 70 °C

Applications

● 10GBASE-ER/EW at 10.3125Gbps

● OTN G.709 OTU1e/2/2e

● 4x, 8x and 10x 10G Fiber Channel

● Other optical links

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.