Single Mode Fiber 25G SFP28 Transceiver Module 1310nm 10km DOM

Single Mode Fiber 25G SFP28 Transceiver Module 1310nm 10km DOM

25G SFP28 Optical Module Juniper Networks JNP-SFP-25G-LR Compatible 1310nm 10km DOM

General Operating Characteristics

Electrical Characteristics (TOP(C) = 0 to 70 ℃, VCC = 3.13 to 3.47 V)

Note:

1. TD+/- are internally AC coupled with 100Ω differential termination inside the module.

2.Tx Fault and Rx LOS are open collector outputs, which should be pulled up with 4.7k to 10kΩ resistors on the host board. Pull up voltage between 2.0V and Vcc+0.3V.

3. RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the user SERDES.

Product Descriptions

25G SFP28 optical transceiver module is designed for use in 25Gb/s data rateover single-mode fiber for link length 10Km.

The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links.

Product Features

● Supports up to 25.78Gb/s bit rates

● Compliant to IEEE 802.3cc

● Compliant to SFF-8402 for SFP28 solution

● Digital Diagnostic Monitor Interface with SFF-8472

● Hot pluggable SFP+ footprint

● Applicable for 10Km SMF connection

● High transmission margin

● Low power consumption<1.5W

● Single 3.3V power supply

● Operating case temperature: Commerical:0 to 70 °C

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.