1550nm 40km 10gb SFP+ Sr Transceiver SMF For Ethernet Switches

1550nm 40km 10gb SFP+ Sr Transceiver SMF For Ethernet Switches

MikroTik S+55DLC40D Compatible 10GBASE-ER SFP+ 1550nm 40km Transceiver

Oinkcom's SFP+ ER transceivers provide 10GBase-ER throughput up to 40km over single-mode fiber (SMF) using a wavelength of 1550nm via a LC connector. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters.

Product Features

1. Hot pluggable
2. 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-ER
3. Distance up to 40km on single mode fiber
4. Part number and unique product serialization
5. Duplex LC connector
6. Digital Diagnostic Monitor Interface

7. 100% Guaranteed Compatibility

​

Absolute Maximum Ratings

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

General Operating Characteristics

Digital Diagnostic Specifications

The OLSP551XL-C(I)D40 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.

Notes:

1. When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75

2. Internally measured

3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser

Compatibility

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.