CNC38RET+RBE-4A Tube Bender Tail Bend Extension Booster Suitable
For Stainless Steel Pipe
CNC38RET+RBE-4A Tube Bender
This is a fully automatic CNC pipe bending machine, forming one
time, with multiple servo motors, and bending more accurately.
Advantages of equipment use
1, Automatic tube bending machine workstation, Tube forming in one
time .
2, Reduce labor ,saving labor cost.
3, Two automatic feeding machines each feed the tube bender
automatically, and a robot loads and palletizes the two tube
benders at the same time.
4, The whole process all is controlled by PLC , with touch screen
man-machine interface, the efficiency is improved wholely.
5, Automatic Identification of tube welds to make tube Bend Machine
avoid Weld seam.
6, Use Industrial Robot for loading and unloading stacking.
Main technical parameters of the equipment
| machine characteristics | | main technical parameter | |
| (1) Electical servo bending | Max capacity | round tube/iron tube( S=40kgf/mm ) | 38.1x1.8t |
| (2) Imported servo motor and reducer | Round tube/non iron metal tube( S=25kgf/mm ) | 38.1x1.2t |
| (3) Independent R & D software system | Round tube /stainless steel tube( S=60kgf/mm ) | 38.1x1.2t |
| (4) 1-5 layer die optional | Square tube/Metal Tube( S=40kgf/mm ) | 30x1.5t |
| (5) 11 axis full motor type optional | Bending radius | 25~150mm |
| Push-bending type, bending radius7D | Servo bending axis | precision | ±0.05 |
| max speed | 166°/sec |
| Servo material feeding axis | precision | 0.05mm |
| max speed | 1200mm/sec |
| Servo tube rotate axis | precision | 0.05 |
| max speed | 220°/sec |
Applications:
Auto,motorbike,aircraft,bicycle,kids bike,fitness
equipment,furniture,outdoor equipment,air conditioner,food
machinery,nulcear tube such as reactor,evaporator and heat
exchanger.
Machine characteristics:
1. Automatic 3D simulation function for tube-forming is selected as
required.
2. An automatic error-fault detecting function is provided,and the
errors and faults are displayed on the screen,so that the operator
can much easily troubleshoot.
3. Automatic 3D simulation function for detecting interferring
position is selected as required.
4. All processing data are inputted by the touch screen.
5. Based on the change of materials,each curve is set with a
compensation value,a speed and a demoulding gap.
6. The feeding mode comprises the clamping feeding mode or the
direct feeding mode which is selected as required.
7. The X.Y.Z coordinate can be automatically switched into the
Y.B.C processing values.
8. After the data are compiled,the data is protected by a key,so
that the data are prevented from any modification.
9. A feeding cart’s feeding position,safety position,wheel mode
interfering position and guided mode interfering position are
set,so that a hand wheel pulse wave generator can be finely
tuned,the position can be automatically remembered,and the error
caused by the manual measurement and the loss caused by the feeding
cart bumping the machine are eliminated.
10. The feeding shaft will perform automatic detection before
acting,so that the feeding shaft is avoided from bumping the
machine.
