This product is suitable for power transmission and distribution
under AC rated voltage 0.6/1kv and 50Hz operating frequency lines.
| Voltage rating for XLPE Power Cable | No. x Nominal Cross Section of Conductor No. x mm2 |
| 1 core | 2 core | 3 core | 3+1 core | 4core | 3+2 core | 4+1 core | 5 core |
| 0.6/1 kV | 1x4 mm2 | 2x4 mm2 | 3x4 mm2 | 3x4 mm2 + 1x2.5mm2 | 4x4 mm2 | 3x4 mm2 + 2x2.5mm2 | 4x4 mm2 + 1x2.5mm2 | 5x2.5 mm2 |
| 1x6 mm2 | 2x6 mm2 | 3x6 mm2 | 3x6 mm2 + 1x4 mm2 | 4x6 mm2 | 3x6 mm2 + 2x4 mm2 | 4x6 mm2 + 1x4 mm2 | 5x4 mm2 |
| 1x10 mm2 | 2x10 mm2 | 3x10 mm2 | 3x10 mm2 + 1x6 mm2 | 4x10 mm2 | 3x10 mm2 + 2x6 mm2 | 4x10 mm2 + 1x6 mm2 | 5x6 mm2 |
| 1x16 mm2 | 2x16 mm2 | 3x16mm2 | 3x16 mm2 + 1x10 mm2 | 4x16 mm2 | 3x16 mm2 + 2x10 mm2 | 4x16 mm2 + 1x10 mm2 | 5x10 mm2 |
| 1x 25 mm2 | 2x 25 mm2 | 3x 25 mm2 | 3x25 mm2 + 1x16mm2 | 4x25 mm2 | 3x25 mm2 + 2x16mm2 | 4x25 mm2 + 1x16mm2 | 5x16 mm2 |
| 1x35 mm2 | 2x35 mm2 | 3x 35 mm2 | 3x35 mm2 + 1x16mm2 | 4x35 mm2 | 3x35 mm2 + 2x16mm2 | 4x35 mm2 + 1x16mm2 | 5x25 mm2 |
| 1x50 mm2 | 2x50 mm2 | 3x 50 mm2 | 3x50 mm2 + 1x25mm2 | 4x50 mm2 | 3x50 mm2 + 2x25mm2 | 4x50 mm2 + 1x25mm2 | 5x35 mm2 |
| 1x70 mm2 | 2x70 mm2 | 3x 70 mm2 | 3x70 mm2 + 1x35mm2 | 4x70 mm2 | 3x70 mm2 + 2x35mm2 | 4x70 mm2 + 1x35mm2 | 5x50 mm2 |
| 1x95 mm2 | 2x95 mm2 | 3x 95 mm2 | 3x95 mm2 + 1x50mm2 | 4x95 mm2 | 3x95 mm2 + 2x50mm2 | 4x95 mm2 + 1x50mm2 | 5x70 mm2 |
| 1x120 mm2 | 2x120 mm2 | 3x 120 mm2 | 3x120mm2 + 1x70mm2 | 4x120 mm2 | 3x120mm2 + 2x70mm2 | 4x120mm2 + 1x70mm2 | 5x95 mm2 |
| 1x150 mm2 | 2x150 mm2 | 3x 150 mm2 | 3x150mm2 + 1x70mm2 | 4x150 mm2 | 3x150mm2 + 2x70mm2 | 4x150mm2 + 1x70mm2 | |
| 1x185 mm2 | 2x185 mm2 | 3x 185 mm2 | 3x185mm2 + 1x95mm2 | 4x185 mm2 | 3x185mm2 + 2x95mm2 | 4x185mm2 + 1x95mm2 | |
| 1x240 mm2 | | 3x 240 mm2 | 3x240mm2 + 1x120mm2 | 4x240 mm2 | 3x240mm2 + 2x120mm2 | 4x240mm2 + 1x120mm2 | |
| 1x300 mm2 | | 3x 300 mm2 | 3x300mm2 + 1x150mm2 | 4x300 mm2 | 3x300mm2 + 2x150mm2 | 4x300mm2 + 1x150mm2 | |
| 1x400 mm2 | | | | | | | |
| 1x500 mm2 | | | | | | |
|
Other power cables
Cross-linked polyethylene or PVC insulation, PVC or polyethylene
outer sheath, STA armored or non-armoured power cables/cables
copper core power cables
Type: VV, YJV, VV22, YJV22, VV23, YJV23, NH-VV2 2
Number of cores: single core, 2 cores, 3 cores, 4 cores, 5 cores
Production range: 1.5mm2, 2.5mm2, 4mm2, 6mm, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2,
70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 204mm2, 3504mm2 ,630mm2
Relevant voltage: 300/300v, 300/500v, 450/750v, 0.6/1kV
Applications
This product is suitable for the transmission and distribution of
electricity under AC rated voltage 0.6/1kv , operating frequency
50Hz lines.
Low voltage power cables are used for transmission and distribution
of power in 1kV transmission and distribution systems. Widely used
in electric power, mining, construction, metallurgy, petrochemical,
communications and other fields, completely replace the
oil-impregnated paper insulated power cable.
Cross-linked polyethylene insulated power cables Cross-linked
polyethylene insulated power cables have many advantages over
paper-insulated and PVC-insulated cables. Cross-linked polyethylene
cable has the advantages of high electrical strength, mechanical
strength, high ageing resistance, environmental stress resistance,
chemical corrosion resistance, simple construction, ease of use and
high long-term working temperature. It can be laid without descent
restrictions.
Advantages of cross-linked polyethylene cables
cross-linked polyethylene cables have a higher long-term operating
temperature and a higher current rating. Under the same
environmental conditions, cross-linked polyethylene cables can be
reduced in size by 1 or 2 steps (normal cross-section) compared to
PVC cables. These not only improve the quality and performance of
the product, but also reduce the cost of producing the cable.
Armoured cables
