2.0mm Singlemode SC/UPC Simplex Fiber Optic Patch Cable 100 Meters
1. Fiber Patch Cord Basic Introduction:
Singlemode and multimode fiber optic patch cables of 9/125 (OS1),
62.5/125 (OM1), and 50/125 (OM2/OM3/OM4), which are engineered to
exceed TIA-568 performance requirements. Built with a
bend-insensitive fiber design, these patch cables have the ability
to support high-speed bandwidth network applications from Gigabit
Ethernet (GbE), 10GbE, 40GbE, and to 100GbE. These patch cables are
terminated at both ends with a variety of connector types that
range from LC, SC, and ST as well as MTP.
2. Fiber Optic Patch Cord SC To SC
- Low insertion loss and ultra-low back reflection
- Standard and customized configurations optional
- Single Mode and Multi-Mode optional, simplex and duplex available
- Meets Telecordia-GR-326-CORE
- Length Optional: 1m, 2m, 3m, 5m, 10m, 25m, 30m, etc.
- Used for 3.0mm, 2.4mm, and 2.0mm jacket or 900μm buffer
- PVC, LSZH, Hytrel jacket optional
- Ceramic ferrules for optimal data transmission
- Top-Quality Corning glass cores
3. DuplexSC To SC Patch Cord Application:
- CATV
- Active device termination
- Telecommunication networks
- Metro and Local Area Networks(LANs)
- Data Processing networks
- Premise installation
- Laser source
4. Specification&Technology Parameters
| Parameters | Value |
| Connector Type | LC/UPC,LC/UPC |
| Center Wavelength(nm) | 1310 or 1550 |
| Max.Insertion Loss(dB) | 0.3 |
| Min.Extinction Ratio(dB) | 23 |
| Min.Return Loss(UPC) (dB) | 55 |
| Min.Return Loss(APC) (dB) | 65 |
| Key Orientation | Slow Axis |
| Axis Alignment(deg) | ±3 |
| Operating Temperature(℃) | -20~+70 |
| Storage Temperature(℃) | -40~+85 |
| FIber Type | PM Panda Fiber, Corning Fiber |
* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER
is 2dB lower.
* The default connector key is aligned to the slow axis.
5. Fiber patch cord SC Specification& Technology Parameter:
| Parameter | Unit | Index |
| End-Face Type | | PC | UPC | APC |
| IL | dB | SM: ≤0.3；MM ≤0.1 |
| Repeatability | dB | ≤0.1 |
| interchangeability | dB | ≤0.2 |
| RL | SM | dB | ≥50 | ≥50 | ≥50 |
| MM | dB | ≥36(Without APC connector) |
| Mating Times | | ＞1000 |
| Operating Temperature | ℃ | -40~ +80 |
* EX:OFC-D-LA-LA-09-1-1.0
6. Connector Type Abbreviations:
SC - a snap-in style connector. Known for its excellent
performance. Referred to as Subscriber Connectors, Square
Connectors, or Standard Connectors.
ST - a very popular choice connector for Multimode networks. Also
referred to as Straight Tip connectors, they utilize a
bayonet-style coupling type, enabling a simple twist-on and
twist-off installation.
FC - was at one time the most popular single-mode connector type,
but is now typically being replaced by SC and LC connectors. Also
known as Ferrule Connectors, they utilize a screw-on coupling type
to be used in high-vibration environments and are commonly used for
datacom, telecom, measurement equipment, and single-mode lasers.
LC - a small form factor connector—measuring half the size of an SC
connector. This is a popular choice for single-mode cables. Also
referred to as Lucent Connectors, Little Connectors, or Local
Connectors, these snap-in connectors are typically used for
high-density connections and are compatible with plug-and-play
devices such as SFP modules and XFP transceivers.
7. Geehe Factory Service:
1) High Environmental Stability
Low insertion loss, low polarization dependent loss, low back
reflection, and good uniformity
2) Compact Structure
Small size, it can be directly installed in a variety of transfer
box and just take up little space
3) Strict Quality Control
We guarantee that every product to the hands of customers is
subject to stringent testing standards
4) Factory Audit
We cooperate with famous brands and Japanese customers, with 15
years of factory inspection experience and be familiar with the
whole inspection process by SGS
5) Own Testing Labs
Our factory has its own Agin testing Labs, the machines imported
from Japan, the reliability can be guaranteed
