Gigabit Poe Switch 2 Fiber SFP To 8 UTP Port Industrial Fiber Poe
Switch Din Rail
Introduction of Industrial Fiber Poe Switch
IM-FP288GE is the 10/100/1000 Mbps industrial POE fiber switch,
comply with IEEE802.3af/at power on POE IP cameras through the
Ethernet cable, simple construction, power range up to 100 meters,
operating temperature-40 ℃ to + 75 ℃, meet IP44 protection degree
and EMC industrial grade requirements, DIN rail installation, pass
through dangerous environmental certification and comply with FCC
and CE standards. The reliable industrial grade design could ensure
continuous and stable operation of the automation system.
Key Features of Industrial Fiber Poe Switch
- Support power on POE IP cameras through the wireless access point
(AP) of 5 categories of Ethernet cable.
- IEEE 802.3af/at power on to 1 ~ 8RJ45 ports
- 8x 10/100/1000Mbps Auto-sensing RJ45 ports
- 2x 1000Mbps SFP fiber ports
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard,
half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- Max power to15.4W under af standard to each PoE port
- Detect the PoE models of electrical equipments.
- A store-and-forward switching mechanism
- Operating temperature:-40 ° ~75 ° c
Storage temperature:-40°～ 85°C
Working humidity:10%～90%,non-condensing
Storage humidity:10%～95%,non-condensing
10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m)
100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m)
Transmission distance: 20Km,40Km,60Km,80Km,100Km
Transmission mode: storage and forward
System bandwidth:40Gbps (non-traffic jam)
LEDs: Power, network, fiber
Safety: CE Mark, commercial CE/LVD EN60950
Industry Standards of Industrial Fiber Poe Switch
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3,EN 61000-4-8
Traffic Control: NEMA-TS2
Vibration:IEC 60068-2-6
Freefall:IEC 60068-2-32
Shock:IEC 60068-2-27
Rail Traffic: EN 50121-4
Mechanical information of Industrial Fiber Poe Switch
Shell: Corrugated metal shell
Safety class: IP44
Dimension:158 x 114.8 x 60mm
Mounting method: Din-rail mounting
Specification of Industrial Fiber Poe Switch
| Product Name | Gigabit Poe Switch 2 Fiber SFP To 8 UTP Port |
| Model No. | IM-FP288GE |
| Port | 2x 1000Mpbs SFP ports SM:1310nm/1550nm,20Km 1490nm/1550nm,40~120Km MM:1310nm,2Km 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Power supply | POE power supply input voltage: 48V (max 52V), Single PoE power supply output power: 15.4W (port 1~8) (802.3at standards required special instructions) |
| Safety | CE Mark, commercial CE/LVD EN60950 |
| Warranty | 3 years |
Packaging And Delivery of Industrial Fiber Poe Switch
One 26*19.5*8cm box includes one Gigabit Ethernet Switch, one user
manual, and one warranty card.
Lead Time: usually three to five days, it depends on the quantity.
After-sales Service of Industrial Fiber Poe Switch
1. 36 Months Manufacturer Warranty (Excluding contrived damage or
misusage). We promise that all the products have been passed the
functional test and aging test before delivery.
2. If there is any compatibility problem or any quality problem,
the goods can be returned to us to repair or replace. The buyer
should be responsible for all the charges of returning and second
shipping.
FAQ of Industrial Fiber Poe Switch
Q: What is the MOQ?
A: We do not have MOQ, 1 sample is available.
Q: How long is the lead time?
A: Usually 3-5days. But need to check when you process orders.
Q: Do you have CE, FCC, ROHS?
A: Yes.
Application of Industrial Fiber Poe Switch
Photo of Industrial Fiber Poe Switch
