5 Port 100/1000Mbps Industrial Network Switch
Key Features of SFP Fiber Switch
- 1x100/1000Mbps Auto-sensing SFP fiber ports
- 4x10/100/1000Mbps Auto-sensing RJ45
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard,
half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- DIN rail or Wall installation
- Comply with FCC and CE standards
- A store-and-forward switching mechanism
- Operating environment temperature: -40°C～75°C
It is an ideal solution for IP Surveillance, wind, electricity,
subway PIS, assembly automation, power SCADA, sewage treatment,
metallurgy, intelligent transportation, rail transportation,
military and other industries
Specification of Gigabit Switch 5 Port
| Product Name | 10/100/1000Mbps Industrial Fiber Switch(2F+4TP) |
| Model No. | IM-FS140GE |
| Port | 1x100/1000M SFP Fiber SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500-meter 4x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) 1x6-PIN Power Terminal Block |
| Protocol | IEEE 802.3(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ab(1000Base-TX) |
| Switching Features | Transmission mode: storage and forward Forwarding delay: <10us System bandwidth: 10Gbps (non-traffic jam) Forwarding rate: 14.88Mmps MAC: 4K Packet buffer size: 1.75Mb |
| Network Media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
| LEDs | Power, Fiber, Network, PoE PWR: Power
Fiber: FX1 On: transmission is normal Off: transmission is NOT normal(faulty optical module or
disconnected)
Copper orange: PoE indicator On: PoE is working Off: PoE is not working or this is Non-PoE device
Copper green: Speed indicator On: transmission speed is 1000Mbps Blinking: in transmission Off: Disconnected or working speed is 10/100Mbps |
| Power Consumption | Full loading≤5W |
| Power Supply | Redundant DC12V~DC52V input, typically DC12V/DC24V/DC48V Reverse connection: support |
| Environment | Working temperature: -40°C～75°C Storage temperature: -40°C～85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
| Industry Standards | ESD: IEC61000-4-2, ±15KV air, ±6KV contact EFT: IEC61000-4-4, General ±6KV Surge: IEC61000-4-5, Differential ±2KV, Common±6KV |
| Certification | CE-EMC: EN 55032:2015+AC: 2016+A1:2020+A11: 2020 EN 55035:2017+A11: 2020/EN IEC 61000-3-2:2019/A1: 2021 EN 61000-3-3: 2013/A2: 2021/AC:2022 CE-LVD: EN IEC 62368-1: 2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B(Class B) ANSI C63.4: 2014 |
| Mechanical information | Shell: Corrugated metal shell, IP40 grade level Dimension: 114*93*35mm Mounting method: Din-rail/Wall mounting Weight: 0.35Kg/0.45Kg(Net/Gross) |
| Warranty | 3 years, lifetime technical support |
Packing List
- 1pc switch
- 1pc user manual
Remark
Accessories(DIN rail bracket, optical module, power supply,
patchcord, network cable etc.)are NOT included in the packing box,
please prepare it by yourself or purchase a whole set from us
Shipping box information
Product size: 11.4*9.3*3.5cm
Inner box size: 23*16.5*5.8cm
Product weight: 0.35Kg
Packing weight: 0.45Kg
Master box size: 67*33*47cm
Packing quantity: 40Pcs
Packing weight: 20Kg
Application
Accessories
| Industrial Optical Module |
| OSPL1E06D-85 | 100BASE-FX(850nm) |
| OSPL1E06D | 100BASE-FX |
| OSPL1E20D | 100BASE-LX |
| OSPL1E40D | 100BASE-EX |
| OSBL1E20D-35 | 100BASE-BX-U(TX 1310 RX1550) |
| OSBL1E20D-53 | 100BASE-BX-D(TX 1550 RX1310) |
| OSPL1G05D | 1000BASE-SX |
| OSPL1G06D | 1000BASE-SX(1310nm) |
| OSPL1G20D | 1000BASE-LX |
| OSPL1G40D | 1000BASE-EX |
| OSBL1G20D-35 | 1000BASE-BX-U(TX 1310 RX1550) |
| OSBL1G20D-53 | 1000BASE-BX-D(TX 1550 RX1310) |
| Industrial DIN Power Supply |
| IM-DAC220/DC12V1.67A | AC220V to DC12V1.67A, -30℃～70℃ |
| IM-DAC220/DC24V1A | AC220V to DC24V1A, -30℃～70℃ |
FAQ
1, What chip is it based?
Olycom: Realtek
2, Can I customize it?
Olycom: Yes
We support OEM services like logo, model name, label, PVC mask and
product parts(mounting kit, power terminal block etc.)
3, Can I connect it with 10/100M devices?
Olycom: Yes
Fiber ports support 100M or 1G optical modules, plug-and-play, no
need of extra configuration
Copper ports are 10/100/1000M auto-adaptive
4, Is it managed?
Olycom: No
Its just simple plug-and-play, but we have a managed
model(IM-FS140GM)
