Automatic Laser Pneumatic Chuck for Laser Pipe Cutting Machine
1. Descripition
This chuck is designed for laer pipe cutting equipment. It can
realize quick clamping and loosening by rotating air intake from
the side, disconnet the air source before working. It is controlled
by switching single and double cylinders, which produces differentc
clamping forces, which has more advantages of clamping thin-walled
tubes and heavy-duty pipes.
This model has small rotational inertia and consume low energy. The
chuck has better dustproof performance and higher repeat
positioning accuracy.There’s two independent cylinders, one-way valve and check valve
and it also has long-term pressure holding function( over 8 hours)
inside. The quick clamping and loosening actions can be achieved
through the side rotation of air inlet, and disconnect the air
source to start the work. After fixing the base, connecting motor
with gear and compressed air source can realize clamping and
driving the work-piece to rotate. It is mainly used for work-piece
clamping and rotating.
2. Performance Parameters
| M230J |
| 230mm |
| 2KN |
| 0.1-0.9MPa |
| 525r/min |
| 5-230mm |
| 350mm |
| 4Kg.m2 |
| 97kg |
| 200kg |
3. Dimensions
| Specifications | A | B | E | F | G | H | I | J | K | L | M | N |
| M230J | 350 | 680 | 205 | 402 | 376 | 326 | 460 | 510 | 60 | 30 | 120 | 180 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing
profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5. Production Line
