Miniature tension compression load cell with M3 threaded hole
Miniature Tension And Compression Load Cell FSSM offers a compact
design for a variety of applications. the S Beam Load Cell series
provides accuracy, compact design features, and a wide capacity
range from 10N to 1000N to choose from.The mini load cell FSSM
utilizes metal foil strain gauge technology to deliver 2.0mV/V
output with maximum 0.1% non-linearity of the full scale,the
compact design enables the FSSM to be easily embedded into
machinery or test equipment – ideal for packaging machinery,
assembly machinery or end-of-line test equipment.The sensor
features threaded holes on two sides for the mounting of
attachments or implements,this micro force sensor can be used for
both tension and compression force measurement in applications with
limited space.You may find junior S beam load cell FSSM
interchangeable with FUTEK load cell LSB200,Mark Miniature Force
Sensors Series R04,flintec s-beam force sensor ISA,flintec load
cell ISB,etc..In addition to the standard specifications,model FSSM
can also be modified or customized to better fit clients'
applications.
Specifications
| Capacity | 10N / 1kgf / 2.2lbf
20N / 2kgf / 4.4lbf
50N / 5kg f/ 11.2lbf
100N / 10kgf / 22.4lbf
200N / 20kgf / 45lbf
300N / 30kgf / 67lbf
500N / 50kgf / 112lbf
1kN / 100kgf / 224lbf |
| Rated output | 2.0mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% R.O. |
| Hysteresis | ±0.1% R.O. |
| Nonrepeatability | ±0.05% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø2*4000mm 4-core shielded |
| Wiring code | Compression@
Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A load cell is a transducer that converts mechanical load into mV
signal proportional to the applied force.The acting load causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
weight/load/force can be measured by measuring the output signal
from the transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output is normally within 1mV/V~3mV/V.
Power supply is normally within 3-15V.
Load / Capacity is within 0-1.
So the load cell output signal is normally within
0-45mV(-45mV...+45mV for bidirectional load cell).
Example one: FSSM-2kg with 2.0mV/V rated output powered by 3.3V
DC,the output range is -6.6mV...+6.6mV.
Example two: FSSM-1kg with 2.2mV/V rated output powered by 10V
DC,the output range is -22mV...+22mV.
M3 threaded miniature tension and compression load cell 1kg 2kg
Click here to download datasheet
