CUT40 IGBT SINGLE PHASE 40AMPS PLASMA CUTTER IGBT Plasma Cutter Air
Inverter Plasma Cutting Machine
1. Air Plasma Arc Cutter takes compressed air source and AC current
as energy source, at low cost in cutting.
2. Suitable for stainless steel, aluminum, copper, titanium, cast
iron, carbon steel, alloy steel, alloy metal and nearly all the
metals cutting.
3. High cutting efficiency
4. Complete accessories: Cutting torch, welding cable, earth clamp,
carton box.
Technical Parameter:
| Inverter Air Plasma Cutter | CUT-40 |
| Input power voltage(V) | AC220V±10% |
| Frequency(Hz) | 50/60 |
| Rented input power capacity(KVA) | 4.9 |
| Rate input current(A) | 44.2 |
| No-load voltage(V) | 220 |
| Current range(A) | 15-40 |
| Rated output voltage(V) | 96 |
| Rated duty cycle(%) | 50 |
| No-load power(W) | 40 |
| Efficiency(%): | 85 |
| Power factor | 0.93 |
| Insulation class | B |
| Protection class | IP21 |
| Arc-starting | Touch |
| Air pressure | 0.4 |
| Gas flow(L/min) | 80 |
| Max Thickness(mm): | 12 |
| NW(kg) | 8.5 |
| Dimensions(mm) | 371*153* 233 |
1 Standard digital control port, provide 1:1 arc voltage, the
digital control dedicated signal to judge arc striking successful.
The industry's first new arc maintenance technology, millisecond
level high-frequency ignition, the smallest high-frequency
interference.
2 Preset current function, accurate preset cutting current, five
levels adjustable, cut different thickness plate.
3 Better function than leakage resistance cutting machine, a high
success rate of arc striking, good arc stiffness, smooth cut,
excellent process performance.
4 Current rise slowly when cutting arc starting, effectively extend
the useful life of electrode and nozzle.
5 Cutting current stable, it doesn't influence to cutting current
when voltage fluctuates within 10%.
6 High load sustained rate, no stop work for a long time under the
max current cutting.
7 Non-contact arc striking, instant arcing, arc strong,
conveniently cut the metal which has rust and paint.
8 Less pollution, more economy, more effective, more
environmentally friendly than flame cutting machine.
9 Over-current, over-heat, and overload protection system, make
sure the equipment works reliably.
