Good Price Two Display Manual Operated Electrostatic Powder Coating
Machine
Introduction
AS919 manual operated electrostatic powder coating machine is
suitable for spraying dead angle and groove. Secondary spraying can
achieve good effect, good atomization, uniform spraying, high
powder loading rate, powder saving, low voltage loss, high charging
efficiency, durable and convenient cleaning
Working principle
Electrostatic powder coating is mainly used to optimize the surface
quality of metal or plastic workpiece. It is a coating method of
spraying powder coating into mist by high pressure, charging
negatively under the action of high voltage DC electric field, and
adsorbing on the surface of positively charged substrate to
discharge, so as to make it uniformly adsorb on the surface of
workpiece and solidify, so as to achieve the purpose of beauty and
wear resistance.
Quick Details
Voltage
| 210 V - 240 V | Output air pressure | 0 - 0.5Mpa |
Frquency | 50Hz | Output voltage | 0 - 100KV |
| Input power | 30W | Gas consumption | 15m³ / min |
| Input air pressure | 0.4-0.6Mpa | Output current | 0 - 150uA |
| Output air pressure | 500g / min | Size of hopper | 350 * 550 mm |
Advantages and selling points
1. High voltage output.
2. Powder saving.
3. Easy to use and clean.
4. Low cost.
5. Good quality.
Package
Cartoon package
Company introduction
Astar Machinery Co., Ltd. is a comprehensive service in production,
R&D; and sales, operates mainly in electrostatic spraying
equipment, including electrostatic dust elimination equipment;
electrostatic flocking machine, electrostatic powder spraying
machine, electrostatic liquid spray machine, electrostatic spraying
gun, high voltage module, circuit board, powder barrel, powder
tube, Hv cable, reciprocator, spraying room, control cabinet, oven,
oven, vibration sieve, the wind leaching room.
Picture
