KCI K1 Half intelligent Complete Set Of Automatic Powder Coating
Machine
Feature
The new technology accumulated by K1 makes the powder loading rate
of the spray gun more efficient, saves the amount of powder used,
and makes the dead angle spraying easier. As a new KCI technology,
non-static powder hose can eliminate sparks and prevent operators'
safety accidents caused by fire and electrostatic impact. The one
touch button installed in the spray gun can quickly clean the
inside of the spray gun and powder hose.
Advantages
1. Never wear the spray gun, optimize the internal structure of the
spray gun, use non stick powder wear-resistant materials, never
wear, reduce the replacement of vulnerable parts of the spray gun
and the resulting waste rate.
2. The shell of spray gun is made of imported material, never
sticking powder.
3. The weight of spray gun is reduced, only 420 grams, which
greatly reduces the fatigue of workers.
4. The spray gun adopts the ergonomic principle, which is more in
line with the use habits of Chinese people and greatly reduces the
fatigue degree of workers.
5. The module uses Philips particles to enhance the characteristics
of high-voltage module.
6. Fully considering the characteristics of re spraying parts and
dead corner parts, the self-adjusting function of current is added
to make re spraying parts and dead corner parts easier to spray.
7. The third gas is added to clean the needle, so that the needle
will not accumulate powder; The rotary atomization air flow is
generated to make the re spraying parts and the dead corner parts
more easily powdered.
8. Powder hand-operated spray gun EPG three different diameters of
dispersed powder guide body, spraying all kinds of workpieces more
flexible, special flat nozzle makes the dead corner parts easier to
spray.
9. The built-in high-voltage module improves the measured
high-voltage on the basis of the past, and improves the powder
loading rate of the workpiece.
10. Large flow pneumatic components are selected, so high powder
output can still be achieved under relatively small gas source
pressure.
11. The new treatment method of art design is adopted on the outer
surface of the shell to enhance various parameters of the surface
coating and make the equipment appearance.
Quick Details
Voltage
| 110V / 220V | Output voltage | 100KV |
Display | Digital | New function | Bluetooth |
| Function | Three powder coating methods | Gas consumption | 10 m³ / h ( 0.4Mpa ) |
| Input air pressure | 8 bar | Output current | 180uA |
| Output air pressure | 500g / min | Gun type | Automatic |
Advantages and selling points
1. Original parameter
2. Advanced technology
3.Good powder coating effect.
Package
Cartoon package
Company introduction
Astar Machinery Co., Ltd. is a comprehensive service in production,
R&D; and sales, operates mainly in electrostatic spraying
equipment, including electrostatic dust elimination equipment;
electrostatic flocking machine, electrostatic powder spraying
machine, electrostatic liquid spray machine, electrostatic spraying
gun, high voltage module, circuit board, powder barrel, powder
tube, Hv cable, reciprocator, spraying room, control cabinet, oven,
oven, vibration sieve, the wind leaching room, supply Gema, KCI,
Wagner accessories, professional wholesale gun shell, venturi tube,
powder pump, deflector, nozzle, electrode holder and other
products.
Picture
