750ml Home Use Ultrasonic Jewelry, Glasses Ultrasonic Cleaner with
Digital Timer
GT-F6 Small Ultrasonic Cleaner
New upgraded product, minimalist design, efficient cleaning, with 5
cycle digital timer. It is ideal for cleaning jewels, glasses &
timepieces, shaver heads, metal articles, etc.
Specification:
Model | GT-F6 |
Tank Material | SUS304 |
Tank Size | 150*130*50mm |
Overall Size | 175*155*100mm |
Ultrasonic Power | 40KHz |
Capacity | 750ml |
Time Setting | 180S-280S-380S-480S-90S |
Output Power | 35W |
Power Supply | AC100~120V, 60Hz AC200~240V, 50Hz |
Features:
1. Minimalist design: It is small in size, highly reliable in
operation and automation.
2. 5 cycle digital timer: 180s-280s-380s-480s-90s. The timer has
count down function, and the default working time is 180 seconds.
3. Transparent cover with perfect visibolity: It is easy to see the
whle process od removing dirty.
4. The most cost effective model ever
To clean:
Jewelries: necklace, rings, earrings, bracelets etc.
Glasses and timepieces: eyeglasses, watch chains, waterproof
watches etc.
Commodities: shaver heads, razor blades, dentures, combs,
toothbrushes etc.
Metal articles/Dishware: watch parts, coins, spoons, forks etc.
Stationery: pen-heads, printer-heads, inject cartridges, seals etc.
Principle of Ultrasonic Cleaner:
Ultrasonic cleaning is based on the cavitation effect caused by
high frequency Ultrasonic wave vibration signal in the fluid.
Microscopic bubbles are formed,and they implode violently causing
the cavitation which create an intense scrubbing action on the
surface of the item being cleaned.
The bubbles are small enough to penetrate microscopic
crevices,cleaner them thoroughly and consistently.Ultrasonic
cleaning is extremely effective at removing dirt and grime which
would normally require tedious manual cleaning by hand.
It has been used to clean a wide variety of instruments and
mechanical parts such as carburetors,returning them to almost ‘like
new’ condition without damage to delicate parts.
Advantage:
1, Reply your enquiry in 24 working hours.
2, Experienced staffs answer all your questions in fluent English.
3, OEM is available if the quantity is large.
4, We offer very competitive for all our products.
5, The most important thing is that our product of quality, our
design is innovative,we choose industrial grade quality circuit
board,we have advanced production line and have very strict quality
control procedures, the failure rate is less than 3%, which is the
lowest in this line.
Raw Material Inspection:
Most of our raw material suppliers are located in GT SONIC
technology park ,our QC and engineers would make strict inspection
of the raw material step by step to ensure quality product.Any
unqualified material will be rejected to guarantee best quality .
it is the energy released by this collapse that will assist a
detergent in breaking the bonds between parts and their soils.
100% product inspection:
We QC team would check the production process to ensure machine
100% qualified. Each unit would be under testing at least 4hours
before packed ,and sales person will send inspection pictures for
your checking.
