GE FANUC IC693ALG222 16-Channel Analog Voltage Input module 90-30 Series

GE FANUC IC693ALG222 16-Channel Analog Voltage Input module 90-30 Series

Product Description

The IC693ALG222 is a 16-Channel Analog Voltage Input module for the GE Fanuc 90-30 Series. This PLC will give you 16 single-ended or 8 differential input channels. The Analog Input features easy-to-use configuration software for 2 input ranges: from -10 to +10 and 0 to 10 volt. This module converts the analog signals into digital signals. The IC693ALG222 receives two input signals which are unipolar and bipolar. The unipolar signal ranges from 0 to +10 V whereas bipolar signal ranges from -10V to +10V.This module can be set up in any of the I/O slots in a 90-30 Programmable control system. There will be connector block mounted on module for connecting to user devices.

The number of channels in the IC693ALG222 may be single ended (1 to 16 channel) or differential (1 to 8 channel). The power requirement for this module is 112mA from 5V bus, and also it requires 41V from 24V DC supply to power the converters. The two LED indicators indicate the status of user power supply the module’ status. These two LEDs are MODULE OK, which gives the status regarding power-up, and POWER SUPPLY OK, which checks whether the supply is above the minimum required level. The IC693ALG222 module is configured either using logic master programming software or via Handheld programming. If the user chooses to program the module via Handheld programming, he can only edit active channels, not active scanned channels. This module uses the %AI data table to record analog signals for the use of the programmable logic controller.

The catalog number IC693ALG222 is an order number for an analog voltage input module that has been designed and manufactured by GE Fanuc. It is made for the GE Fanuc Series 90-30 PLC systems. The GE Series 90-30 PLC systems support the installation of 4 to 51 modules like the IC693ALG222 input module and they are designed for high-end applications. The IC693ALG222 module provides both single-ended and differential input channels. The unit has 1 to 16 selectable single-ended input channels and 1 to 8 selectable differential input channels. Additionally, it should be noted that the update rate is 6 milliseconds for the single-ended channels and 3 milliseconds for the differential channels.

The IC693ALG222 input module has a common mode voltage of +/-11 Volts for the bipolar range and it has a cross-channel rejection of more than 80 decibels from DC to 1 kilohertz. Additionally, the unit has an input impedance of more than 500 kiloohms for operation on single-ended channels and an impedance more than 1 megaohm for operation on differential channels. The unit has a linearity of less than 1 LSC and a resolution at 0 to 10 Volts of 2.5 millivolts. In addition to that, the resolution at -10 to 10 Volts is 5 millivolts. The IC693ALG222 input module consumes 112 milliamps of current from the backplane +5 Volts DC bus voltage supply and 41 milliamps of current from the backplane isolated +24 Volts DC voltage supply. The unit has an input filter response of 41 Hertz for the single-ended mode and 82 Hertz for the differential mode. The IC693ALG222 input module has an input current rating of 0 to +10 Volts (unipolar) or -10 to +10 Volts (bipolar).

Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and staff training. Our company locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic conviction of honest, the international management of customer-centered concept and purpose of bringing convenience to customers. We have confidence to bring our customers more substantial profit with high-quality service and reasonable prices. Choosing us,you will choose a sincere friend and reliable partner. Please feel free to contact us if you are a global manufacturer of high quality brand products who desires to enter the Chinese market or who searches for a Chinese agent.We would like to create a brilliant future with friends in domestic and overseas. All goods sold have one year warranty.

The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.

Our Main Brand:

MITSUBISHI

YASKAWA

PANASONIC

GE FANUC

EMERSON

FISHER-ROSEMOUNT

HONEYWEL

ABB

AB

SHNEIDER MODICON

SIEMENS

................