High Production Efficiency 4 Jaw Laser Chuck Full Stroke Main Chuck
for Laser Special Pipe Cutting Machine
1. Description
Fast clamping and loosening actions can be achieved through the
side rotating air intake, and the air source can be disconnected
for work. After the product base is fixed, only the matching motor
is added and connected with the gear, and then the compressed air
source(0.1-0.9Mpa) is connected to achieve clamping work-piece and
driving the work-piece to rotate.
The chuck adopts fully enclosed structure, the stability and the
wear resistance are better, the service life is longer, the
clamping precision is higher than a traditional laser chuck, the
clamping force is bigger than the similar products in the market,
and the aerodynamic pressure is lower, smaller clamping force can
be obtained, so that thin-walled pipe parts can be processed.
This kinds of chuck is widely applied in laser cutting machine and
other pipe processing machine tool systems.
2. Performance Parameters
Model number | G500C-225 |
| Claw stroke | 200mm |
| Maximum clamping force | 1.6-2.77KN |
| Alloable pressure | 0.1-0.9MPa |
| Limit speed | 130r/min |
| Clamping range | 0-225mm |
| Central height | 315mm |
| Rotational inertia | 6.1kg.㎡ |
| Rotating part weight | 140kg |
| Whole unit weight | 240kg |
Note: above numbers are standard parameters. We can also design
products according to clients' special requirements.
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | K | O | R | S |
| G500C-170 | 670 | 315 | 694 | 672 | 100 | 60 | 640 | 273 | 225 | 235 | 250 | 400 | 10 | 8-M8 | 18X21 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing
profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
e. Multiple configurations are available e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5. Production Line
