About IC693APU302
The IC693APU302 Axis Positioning Module is a motion mate axis
positioning module made by GE Fanuc. It is a fully programmable and
intelligent module that allows PLC users to integrate their
controllers with the advanced logic functions of the PLC to create
a single combined system. It can be used with GE Series 90-30 PLCs.
This module can directly communicate with machines and control
drives and it even transfers the data to the PLC’s tables. Some of
the important features of this module include independent control
stability, automatic data transferring facilities, maximized drive
capabilities, and improved system performance. The IC693APU302 Axis
Positioning Module also has the facilities to calculate and enhance
the position error measurements to maintain the tracking accuracy.
It can be used to perform the complex calculations that are
required to control a servo system precisely.
The IC693APU302 Axis Positioning Module can be configured and
programmed by using VersaPro Software or Logic developer-PLC
software. The load requirement of the module is 800 milliamps of
current at +5 Volts DC voltage. It comes with a 24-pin high-density
connector. This module is suitable to operate in the standard mode
and in the follower mode. When operating in the follower mode, it
offers high-performance electronic gearing facilities for
master/slave applications. Its motion configuration software offers
a user interface for controlling and monitoring the system
effectively. It also offers generic programming commands such as
velocity, forward, move, and acceleration/deceleration commands.
Its flash memory can store up to 10 programs and 40 subroutines.
The APM front panel faceplate has two 24-pin high-density
connectors for servo connections. The IC693APU302 Motion Mate Axis
Positioning Module can be used in servo control applications for
very precise motion control.
