304 Stainless Steel Speed Gate Swing Barrier Turnstile 120W Access Mechanism

304 Stainless Steel High Speed Gate Swing Barrier Turnstile Face Recognition Turnstile 120W Access Gate Mechanism

DC Brushless Motor Barrier Swing Gate Automatic Pedestrian Swing Barrier Turnstile With Face Reader

Glass Tursntile Pre-installation Alignment:

• Before anchoring the cabinets to the floor, we recommend laying out the lane and testing alignment.

•Place the cabinets in their approximate end location and connect the 2 conductor cable inside of the

primary cabinet to the end in the secondary cabinet. Plug in the primary cabinet to AC voltage to power

up the lane.

• Inside of the primary cabinet, there is a series of 7 total photo cell sensors. Each of these sensors is

equipped with two LED’s on the rear. One of them is green and should always be lit. The other should be

solid orange while the beam is uncrossed and off while the beam is crossed.

• If the orange LED is blinking in any case, you will need to adjust the sensor alignment, shift the cabinets

so that they are straight to each other, or shim the cabinets so that they are level.

PRODUCT DESCRIPTION

Swing gate is the barrier gate blocking and releasing by swinging of the arm barrier. The material of the barrier

is usually stainless steel and acrylic. It is mainly used for the management of entries and exits.

The usual application places only allow people to pass, or for people who tow luggage, and disabled people.

Swing gate is an intelligent channel administration device that has been carefully developed, developed and

produced over the years. It is a high-tech product primarily for intelligent administration of personnel channels.

The gadget combines mechanical, digital, microprocessor control and numerous identification applied sciences,

and is equipped with quite a lot of identification system devices and reliable efficiency safety units, alarms, direction

indicators, and extended friendliness. The LED counting display interface coordinates the clever control and

management of the channel.

Swing gate has standard enter and output interfaces, and is the best choice for system integrators. It may be simply

compatible with IC card, ID card, barcode card, fingerprint and other card reader identification units, offering civilized

and orderly access for entry and exit personnel. Methods to successfully handle personnel out and in.

Main function and features

1. The stylish stainless steel column and clear toughened glass wing present a bright and concise design.

2. Bi-directional opening facilitates fast and safe access. It can also be integrated with recognition systems

for user friendly access control.

3. Featured with high security and stability, it’s suitable for banks, corporate headquarters, airports and leisure

venues.

4. Fault detection and alarm functions, easy to use and maintenance.

5. The running status can be programmed and controlled with the built-in keyboard on the main board.

6. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working

automatically within the prescribed time and reset again after the default delay (till fully reset).

7.Anti-breakthrough function. The gate is locked automatically until opening signal received.

8. Synchronization functions (for dual gate equipment).

9.Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),

the system will cancel the authority of the current user automatically.

10. Gate can be set as normally open or normally closed.

11. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Via dry contact signal)

12. Direction can be set as unidirectional or bidirectional.

13. The device can be connected to management computer to realize remote control and management.

14. LED direction indicator (optional)

15. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.

16. Support infrared photocell for anti-pinch and reset function.

Product Application

The brush-less anti-collision swing barrier is an intelligent passage management equipment developed

and produced by our company. It integrates the exquisite mechanical transmission, microprocessor

control, voice and various reading and writing technologies. By configuring different reading and

writing equipment, the intelligent control and management of the passage can be completed. The

machine can realize the public channel's dissuade and access control

Bester (Foshan Bester Smart Access Co.,Ltd) is the enterprise integrating intelligent machinery and electronic technology in road safety machines.
Our main products are turnstile, automatic turnstile, tripod turnstiles, full height turnstiles, sliding gate operators, swing gate operators, flap barriers,

swing barriers, speed gates, automatic barrier gate(barrier, barrier gate, boom barrier, automatic barrier, traffic barrier, car park barrier, road barrier) for car parking lot.
The company have experience with more than 15 years, have been sold to more than 100 countries and regions. The company has sold more than 150,000 units a year.
Besides, we are also professional on providing OEM/ODM service for overseas customers, warmly welcome you to visit our factory and hope we can work together to supply you our high-quality system, offer you the factory cost price, provide you the best service, looking forward to serving you in the near future.