Detailed Images
This machine mainly includes four parts:
1. Main engine 2. Screw system 3. Electrical system 4. Vacuum pump
The following is the specific introduction:
Main engine includes base,upright,top plate,oil drip pan,nut and etc which is one of the main parts. When the oil material
is put into the assembly of the press boring,then it being driven up by the oil cylinder piston ,oil will be
outflow from the gap
of press boring,and then pass the oil drip pan to the drum for oil storage.
manufacture oil mill machinery screw oil process machine
1. The temperature of the oil is automatically temperature controlled
to improve the processing speed of the oil, and the low temperature
environment can be produced normally.
2. The infrared heating preheating temperature can be controlled to
set the heating system, and the press can be pressed at the start.
3. The oil filter is dense so that the oil can be filtered clean.
4. The L shape of oil cake feeding system can directly press oil
cake twice, to ensure the high oil yield.
Cold press peanut oil pressing soybean oil mill machinery
