OEM GPON ONU ONT HK110G 1GE FTTH Optical Network Terminal ZTE Chips
HK110G is an optical network terminal equipment of a series of GPON which
complies fully with IEEE802.3ah standard and meet v2.1 v3.0 of
China Telecom GPON device technology requirement,which is based on
mature and stable, and high cost-effective Gigabit GPON technology
which adopts high-performance GPON ZTE chipset, and has high
reliability, easy management, flexible configuration, robustness,
good quality service guarantee(Qos).
Features to Gpon
• Comply fully with ITU-G.984.1/2/3/4 standard and G.987.3 protocol
• Support bidirectional FEC and RS(255,239) FEC CODEC
• Support 32 TCONT and 256 GEMPORT
• Support AES128 decryption function of G.984 standard
• Support SBA and DBA dynamically broadband allocation
• Support the PLOAM function of G.984 standard
• Support Dying-Gasp check and report
• Support synchronous Ethernet
• Support the rogue ONU alarm function
• Support multiple VLAN function
• Operation mode:SFU or HGU option
• Support TR069,NAT,DMZ,DNS features
• Support Bridge,PPPoE,DHCP and Static IP configuration for WAN
interface
• Support IP,MAC Filtering,Firewall Functionality in routed mode
• Good interworking with the OLT from different manufacturers,such
as HUAWEI,ZTE,Broadcom,etc.
Features to Epon
• Comply fully with IEEE802.3ah standard and CTC EPON device
technology requirement
• Support bidirectional FEC
• Support downlink triple churning
• Support AES128 decryption function
• ONU discovery and registration process implemented by Pure
hardware
• Support the report of the CTC requirement
• Support Dying-Gasp check and report
• Support OAM remote management
• Support VLAN function
• Operation mode:SFU or HGU option
• Support TR069,NAT,DMZ,DNS features
• Support Bridge,PPPoE,DHCP and Static IP configuration for WAN
interface
• Support IP,MAC Filtering,Firewall Functionality in routed mode
• Good interworking with the OLT from different manufacturers,such
as Broadcom,ZTE,HUAWEI, etc.
Tech parameters | Description |
Up-link interface
| PON quantity | 1PC XPON PON |
PON interface receiving rate | 1.25/2.488Gbits/s(Auto-negotiation) |
PON interface transmitting rate | 1.25/1.244Gbits/s(Auto-negotiation) |
TX Optical power | 0-4dBm |
RX Sensitivity | -28dBm |
Safety | ONU authentication mechanism |
Down-link interface
| Fiber type | Single mode singlefiber,20km |
Wavelength(nm) | TX 1310nm, RX 1490nm |
Fiber port | SC/PC,SC/UPC,SC/APC |
Ethernet port | 1PC*10/100/1000M with auto-negotiation
3PCS*10/100M with auto-negotiation |
Power supply | 12V 1 A |
Power | ≤5W |
Operating temperature | -5~55℃ |
Humidity | 10～85%(non-condensation) |
Storage temperature | -30~70℃ |
Definition of indicator LED |
symbol | color | meaning |
| | ON:successfully connect with power OFF:fail to connect with power |
PON | green | ON:ONU port Link link correctly Flicker: PON port data is transmitting OFF:ONU ports link link faulty |
LAN | green | ON: Link link correctly in link link faulty Flicker: data is transmitting in twised-pair OFF: link link faulty in twised-pair |
LOS | red | Flicker: fail to connect with PON port OFF: detected fiber to input |
