Original Control 1GE uplink OLT GPON board H801 MCUD (GE Uplink)
H801 MCUD01 for Huawei SmartAX MA5608T
Product Description
| MA5608T mini olt shelf plan |
| FAN | 1 Service card slot |
| 2 Service card slot |
| 3 Mail control unit board | 4 Mail control unit board | 5 Power input card |
Mail control unit card
Type | Uplink 1GE interfaces | Uplink 10GE interfaces | Other |
| MCUD | 4 | 0 | ETH ALARM IN/OUT CONSLE/ESC AUX
BIT/TOD |
| MCUD1 | 2 SFP | 2 sfp |
| Service card |
| GPBD | 8-port GPON OLT interface board |
| GPBH | 8 Ports Advanced GPON OLT Interface Board |
| GPFD | 16-port GPON OLT interface board |
| XGBC | 4-port 10G GPON OLT Interface Board |
| EPSD | 8-port EPON OLT Interface Board |
| XEBD | 8-port 10G EPON OLT Interface Board |
| OPGD | 48-port FE P2P Access Board(OPGD+24*CSFP/FE) |
| ETHB | 8 port GE uplink board |
| TOPA | TDM processing board |
MA5608T Positioning
The MA5608T has a strong adaptability to the environment and can be
deployed quickly. In FTTx networks, the OLT is moved closer to the
user side, which can save backbone optical cable resources. This
solves the problem of a few users and long access distance, when
FTTx services are applied in an area with a low population density.
- Deployed at the remote end, including the base stations (BSs) and
outdoor environments
- 2 U high, and supports a maximum of two service boards
- Connected to MxUs or ONTs and used in FTTB/C and FTTH scenarios
- Connected to xDSL terminals and phones and used in the MSAN/DSLAM
scenario
Product features
- Integrated Access
- Optical Access
Supports a split ratio of 1:128.
Support small form-factor pluggable (SFP) optical module of Class
B+ or Class C+ and XFP optical module, which can be used in
different scenarios.
High-density 48 single-fiber bi-directional or 24 two-fiber
bi-directional GE/FE P2P optical access is supported.
Supports the high-performance and large-capacity control board
SCUH. In active/standby mode, SCUH supports 20 Gbit/s switching
bandwidth for each slot. In load sharing mode, SCUH supports 40
Gbit/s switching bandwidth for each slot. And provides 960G
switching capacity (doubles performance capacity), improving access
user bandwidth.
Supports the High-Performance Multicast Service. The device employs
the multicast technology to provide IP video services, including
live TV and QVoD, for carriers. By introducing the multicast
technology, the network device can manage, control, and forward IP
video services and thus meets carriers' requirements for
provisioning IP video service.
The MA5600T/MA5603T/MA5608Thas completed its interoperability test
with all mainstream NGN/IMSs.Implements base station access
solution by using MA5600T/MA5603T/MA5608T (OLT)+MDU. And the
MA5600T/MA5603T/MA5608T supports clock synchronization in the base
station access scenario.
Connection to the NGN/IMS network through SIP or H.248,
implementing the VoIP service (including the voice, fax, and modem
services).
The MA5600T/MA5603T/MA5608T supports reconstruction of traditional
voice devices such as the N*64K private line device and ISDN PRI
PBX, implementing the ALL IP architecture.
The MPLS PWE3 provides the E2E reliability and quality assurance
for the service.
- Integrated Capability of Access and Convergence
- NE Convergence
The MA5600T/MA5603T/MA5608T features powerful access and
convergence capability. In the downstream direction, it supports
cascading to other devices through the GE or 10GE port. In the
upstream direction, it supports connection to the IP/MPLS network
through the GE or 10GE port. It also supports dual homing to the
BRAS through direct connection.
Centric Management for GE Remote Extended Subracks in FTTB or FTTC
Scenarios
The MA5600T/MA5603T supports the centric management for GE remote
extended subracks in FTTB or FTTC scenarios so that the network
features higher scalability. The GE remote extended subrack feature
uses new technologies such as VDSL2 and vectoring on the copper
line network to deploy ultra-broadband networks more conveniently
and rapidly.
Application
The MA5600T/MA5603T/MA5608T supports the fiber to the home (FTTH)
network application. It can be connected to the ONT in the user's
house through the PON port or provide the P2P optical access
service through the FE or GE port.
The MA5600T/MA5603T/MA5608T supports the fiber to the building
(FTTB) network application, and is connected to the ONU (MDU or
ONT) that is deployed in the corridor through the PON port.
The MA5600T/MA5603T/MA5608T supports the fiber to the curb (FTTC)
network application, connected to the ONU that is deployed at the
curb through the PON port, or connected to the DSLAM that is
deployed at the curb through the GE optical port.
Centric Management for GE Remote Extended Subracks Networking
Leased Line Service (Enterprise Access)
Leased Line Service (Base Station Access)
- Copper Access Network Application
The MA5600T/MA5603T/MA5608T supports multiple copper access modes
such as ADSL2+, VDSL2, and SHDSL.
Voice Service Network Application
The MA5600T/MA5603T/MA5608T supports the voice service network
application. The MA5600T/MA5603T/MA5608T can function as an AG
(Access Gateway) in the softswitch network to provide the voice
service and transmit the voice service to the IMS network. In
addition, the MA5600T/MA5603T/MA5608T supports the TDM SHDSL
access, which is applicable to reconstruction of the traditional
voice network.
