2S040-10 SUS-10 3/8 Inch Normally Closed SS 304 Solenoid Valve

2S040-10 SUS-10 3/8 Inch Normally Closed SS 304 Solenoid Valve

2S040-10
2S: 2 Positon 2 Way Solenoid Valve. Solenoid valve has 2 pipe connections, an inlet called the cavity port and an outlet called the body orifice port. When the valve is energized the plunger opens allowing media to flow through the valve in the cavity port and out the body orifice port.Turn off the power. The orifice closes and flow through the valve stops.
40: The Aperture of Flow Rate is 4 mm
10:Joint Pipe Bore is G3/8 Inch Female Thread

Technical Data of 2W & 2S Solenoid Valve:

Main dimension of 2W & 2S Series Solenoid Valves:

How to choose normally open or closed solenoid valve?
In general, we select solenoid valve type according to the continuous working period. Common types include normally open, normally closed and self-retaining type. Specific rules as blows:

When the solenoid valve has prolonged on state, and the opening time is much longer than the closing time, we choose normally open solenoid valve.
When the solenoid valve has long-term off state, and the closing time is much longer than the opening time, we should choose normally closed solenoid valve.
When the solenoid valve requires same time on the opening and closing, we should choose self-retaining type solenoid valve, also called double acting type.
For some working conditions used for safety protection, such as the furnace flame detecting and other conditions, normally open solenoid valve is not applicable; we should choose long-term electricity type.
For gas leak alarm device system, we should choose normally open type gas emergency shut-off solenoid valve. After closing, the solenoid valve should be started up manually.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on