Submerging Bitcoin Miners Immersion Cooling System Dry Coolers
What's Immersion Cooling?
Immersion cooling involves submerging Bitcoin miners in a
non-conductive fluid. Though counterintuitive to submerge in a
clear, dielectric fluid – fluid is much more effective at
dissipating heat than air (roughly 1600x more effective). However
our USA partner can offer the whole immersion cooling system design
and offer.
Advantage Of Immersion Cooling?
1. 25-55% More Terahash
2. Less Capex To Achieve Same Hashrate
3. Improved Machine Lifespans
4. Significantly Reduced Machine Maintenance
5.Eliminate HVAC & Air Cooling Overhead
Dry cooler For Immersion Cooling System
Feature:
| High efficiency heat exchanger: capacity designs for maximizing the
heat transfer relative to the energy consumption of the fan. Tube
and tube coupling design for low pressure drop in the coil on the
media sides(maximum 100KPa at water designing condition). Our
thermodynamic and aerodynamic designing software is long year
tested and proved in Germany |
| Fan: only choose low specific energy consumption fans. Fan nozzle
designs for maximum air flow and air throw.Our fans from the
world`s leading manufacturer are practically proved to be reliable
in operation and long lasting. Motor: protection class IP 54 and
insulation class F. Air separator for each fan. |
| We facilitate you to have a long lasting and low maintainance
operation. Durable material and rigid enclosure with hard gloss
powder coated finish. Protective enclosure for both manifolds and
U-bends. Unit design for outdoor installation. 100% leakage tested
at 31bar. |
Options
| Coil design refrigerant: water, oil, glycol. | Multiple circuits. |
| Sub-cooling circuits. | Stainless steel or aluminum casing. |
| Coated aluminum or copper fins. | Explosion proof motor. |
| Customized fin spacing. | |
Technical parameter
Dry cooler D1 series parameter (fin space 2.1mm)
| Type | D1-005- 1x350 | D1-006- 1x350 | D1-007- 1x350 | D1-009- 1x450 | D1-011- 1x450 | D1-013- 1x450 | D1-014- 1x500 | D1-017- 1x500 | D1-020- 1x500 |
| Capacity | Water | 35℃ outdoor temp. | Inlet | 45℃ | △ | KW | 4.89 | 5.9 | 6.83 | 9.39 | 10.99 | 13.33 | 14.32 | 17.01 | 19.8 |
| outlet | 40℃ | Y |
| 20% Glycol | Inlet | 45℃ | △ | 4.72 | 5.69 | 6.69 | 8.9 | 10.61 | 13.05 | 13.91 | 16.11 | 19.29 |
| outlet | 40℃ | Y |
| Medium | Water flow | M3/h | 0.85 | 1.03 | 1.2 | 1.63 | 1.91 | 2.3 | 2.5 | 3 | 3.5 |
| Pressure drop | kPa | 36 | 31 | 58 | 25 | 40 | 80 | 50 | 60 | 40 |
| Air flow | △ | M3/h | 2828 | 2712 | 2492 | 6199 | 5827 | 5225 | 8469 | 8168 | 7601 |
| Y |
| Fan motor | Phase | 1 | 1 | 1 | 3 | 3 | 3 | 3 | 3 | 3 |
| △ | W | 140 | 140 | 140 | 540 | 540 | 540 | 830 | 830 | 830 |
| Y |
| △ | A | 0.6 | 0.6 | 0.6 | 1.1 | 1.1 | 1.1 | 1.45 | 1.45 | 1.45 |
| Y |
| Fan | No X φ | 1x1x350 | 1x1x350 | 1x1x350 | 1x1x450 | 1x1x450 | 1x1x450 | 1x1x500 | 1x1x500 | 1x1x500 |
| Sound pressure level | △ | dB(A) | 31 | 31 | 31 | 43 | 43 | 43 | 49 | 49 | 49 |
| Y | 10m |
| Dimension | L | mm | 870 | 870 | 870 | 1020 | 1020 | 1020 | 1220 | 1220 | 1220 |
| W | mm | 525 | 525 | 525 | 625 | 625 | 625 | 825 | 825 | 825 |
| H | mm | 797 | 797 | 797 | 820 | 820 | 820 | 870 | 870 | 870 |
| A | mm | 690 | 690 | 690 | 840 | 840 | 840 | 1040 | 1040 | 1040 |
| B | mm | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| C | mm | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| D | mm | 490 | 490 | 490 | 490 | 490 | 490 | 490 | 490 | 490 |
| Inlet φ | mm | 3/4” | 3/4” | 3/4” | 1” | 1” | 1” | 1-1/4” | 1-1/4” | 1-1/4” |
| Inlet φ | mm | 3/4” | 3/4” | 3/4” | 1” | 1” | 1” | 1-1/4” | 1-1/4” | 1-1/4” |
| Product weight(empty) | kg | 38 | 42 | 48 | 55 | 60 | 67 | 75 | 82 | 91 |
Note: Standard SHSL-D1 dry cooler is vertical air discharge, for
horizontal air discharge please add “H” in nomenclature, for
excmple:SHSL-D1-005H-1X350
Our Dry Cooler Structure:
Easy To Trasport And Install:
Reference
| For solar industry | Country: China
Application :cooling of solar heating system when it is overheated
Cooling capacity: 463, 933 and 1475kW
Cooling medium: 50% propylene glycol water
Supply power: 380V/3P/50Hz
Fan brand: Ziehl-Abegg
Altitude:4200m | Country: UAE
Application: solar thermal system
Cooling capacity: 21kw
Cooling medium: water
Supply power: 230V/1P/50Hz
Fan brand: Chinese brand | Country: Korea
Application: solar system overheated
Cooling capacity: 32kW
Cooling medium: 30% ethylene glycol water
Supply power: 230V/1P/60Hz
Fan brand: Chinese brand
|
|  | 
|
| For plastic industry | Country: Algeria
Application: cooling water from injection molding machine
Cooling capacity: 694kW
Cooling medium: water
Supply power: 400V/3P/50Hz
Fan brand: Ziehl-Abegg | Country: Armenia
Application: for plastic caps of beverages factory
Cooling capacity:70kW
Cooling medium: 34% ethylene glycol
Supply power: 380V/3P/50Hz
Fan brand: Chinese brand | Country: Russia
Application: bathtub factory
Inlet/outlet air temperature:40℃/66℃
Inlet/outlet water temperature:85℃/50℃
Air volume:7986m3/h
Cooling medium:water
Supply power: 380V/3P/50Hz
Fan brand: Chinese brand |
 |  | 
|
| Instead of cooling tower | Country: Argentina
Application: for equipment cooling, to match chiller.
Cooling capacity: 245kW
Cooling medium: water
Supply power:380V/3P/50Hz
Fan brand: Chinese brand
| Country: Peru
Application: instead of cooling tower, to match chiller.
Cooling capacity: 360kW
Cooling medium: water
Supply power:440V/3P/60Hz
Fan brand: Chinese brand
With wet curtain, with water pump and water tank
| Country: Mauritius
Application: supermarket and will match chiller use.
Heat transfer capacity: 502kW
Cooling medium: water
Inlet air temp.: 32℃
Inlet medium temp.: 42℃
Outlet medium temp.: 37℃
Medium volume: 88m3/h
Material: copper tube aluminum fin and galvanized steel frame,
RAL9010 powder coating.
Supply power: 380V/3P/50Hz
Fan brand: Chinese brand, air volume: 20228m3/h |
|
|  |
| For data center cooling | Country: Mongolia
Application: match with precision air conditioner
Cooling capacity: 17.6kW
Cooling medium: 34% ethylene glycol
Supply power: 400V/3P/50Hz
Fan brand: Ziehl-Abegg | Country: Russia
Application:data center cooling
Cooling capacity: 763kW
Cooling medium: water
Supply power: 380V/3P/50Hz
Fan brand: Ziehl-Abegg | |
 | 
| |
| Factory cooling | Country: Russia
Application: ore yard cooling
Cooling capacity: 493kW
Cooling medium: 20% ethylene glycol
Supply power: 400V/3P/50Hz
Fan brand: Ziehl-Abegg | Country: China
Application: plant cooling
Cooling capacity: 52kW
Cooling medium: 30% ethylene glycol
Supply power: 380V/3P/50Hz
Fan brand: Chinese brand | |
 |  | |
| For power plant | Country: Hongkong
Application: power plant
Cooling capacity: 363kW
Cooling medium: water
Supply power: 415V/3P/50Hz
Fan brand: Chinese brand | Country: Russia
Application: power plant.
Cooling capacity: 180kW
Cooling medium: water
Supply power: 380V/3P/50Hz
Fan brand: Chinese brand | |
| 
| |
| Other application | Country: Singapore
Application: match with fruit and vegerable freezer
Cooling capacity: 14.6kw, 17kw and 29.37kw
Cooling medium: 20% ethylene glycol
Supply power: 230V/1P/50Hz
Fan brand: Ziehl-Abegg | Country: Singapore
Application: wastewater treatment factory, cooling water
Cooling capacity: 429kW
Cooling medium: water
Supply power: 400V/3P/50Hz
Fan brand: Ziehl-Abegg | Country: Russia
Application: industrial cooling
Cooling capacity: 153kW
Cooling medium: 20% glycol
Supply power: 380V/3P/50Hz
Fan brand: Ziehl-Abegg |
| 
| 
|
