18000BPH PLC Pure Water Filling Machine 7.3W OPS Label

Washing Part:

The bottle enters into the rinsing part of three-in-one machine through air conveyor.

The grippers take the bottles from the inlet star-wheel while they are still driven by the star-wheel, thus guaranteeing a safe grip.

After the gripping, the bottle is turned upside down with 180 degree and cantered above a spraying nozzle which directs a stream of rinse water into the bottle. After the draining period the bottle is turned over to an upright position again to filling machine.

Filling heads:

Long tube filling type with 2 times filling process to make sure perfect filling level Liquid tank, filling valves, controlling rings, upgrading cylinder.

High speed and mass flow filling valve ensures the high filling speed and exact fluid level. Parts contacting liquid are all made of excellent stainless steel or food grade engineering plastic.

Capping Part:

1 Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping

2 All 304/316 stainless steel construction

3 No bottle no capping

4 Automatic stop when lack of bottle

Air Conveyor

1. Air conveyor is fixed on the floor, with fan installed on the top.

2. Air filter is positioned at every entrance of air fan, to prevent dust blown into bottles.

3. Bottles are held on the neck in the conveyor and transported into filling machine by blowing power.

4. All are made of stainless steel SUS 304 /316.

5. Rack made by high quality SUS304 welded.

Flat Conveyor

1. Energy saving. High efficient. Adapt to customer factory layout - Special lubrication system, keep products clean, health, safety - Extended service life

2.Electric eyes design keep whole line running safety and quickly - Overload protection mechanism to effectively ensure the safety of the machine

Bottle blowing machine

Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.

Water treatment system

For producing pure water, system includes pretreatment system, RO unit, post-treatment system, cleaning system and electrical control system, etc.

Shrinking label machine

Capacity: 100-350bottles/min can be choose

Label material: PVC PET OPS etc

Bottle material: PET PE PP Glass

Bottle Diameter: 28 ~ 120mm

Bottle Height: 15~320mm

Bottle shape: round, square, ellipse, rectangular

Label length: 30~250mm(max)

Label thickness: 0.03~0.13mm

Film wrap packing machine

Film material: PE

Shrink membrane thickness: 70~100um

Capacity: 8-35 packages/ min can be chosen

Conveyor belt max width: 600mm

Height is: 1000~1100mm