1 1/2 Inch Welded Pneumatic Actuated Angle Seat Valve DN40
The pneumatic angle seat valve is an air operated linear process
control valve that has an angled body to provide the maximum
possible flow rate with minimal pressure loss across the piston
valve when open. A piston actuator is connected to the valve plug
and is available with either double acting or single acting
function.
The piston valve bodies are typically available in bronze or
stainless steel with various port sizes, pneumatic piston actuator
sizes and materials plus a variety of extra facilities such as a
stroke inhibitor, electrical position feedback and even fully
modulating angle seat valves.
Main Dimension of Angle Seat Valve:
Stainless Steel Body With Stainless Steel Actuator
Technical Data of Angle Seat Valve:
Medium Temperature | |
Ambient Temperature | |
Max. Working Pressure Range | |
Working Medium | Netral and Aggressive Liquid, Gas |
Working Pressure | |
Body Material | |
Seal Material | |
Connection Size | 1/2'', 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' |
Port Connections | Threaded, Flanged, Welded, Clamp |
Nominal Diameter | DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100 |
Safety setting in case of power failure | Normally Closed, Normally Open |
Angle Seat Valve Disassembly Display:
Brando Factory Valve Production:
More Angle Seat Valves for you to choose:
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
