1070/5 5/8'' SAE Flare Refrigeration System HM3 Solenoid Valve

1070/5 5/8'' SAE Flare Refrigeration System HM3 Solenoid Valve​

The shown is castel type 1070/5 solenoid valve, 5/8'' SAE flare port size, 2 way normally closed, 220/230V AC (50/60Hz), 240V AC voltages (other voltages can be customized), ordering code: 1070/5, 1070/5S, 1070/5A6, 1070/5A7.

One of the most popular applications of the solenoid valve is in the refrigeration systems. They are used in air conditioners to change the direction of the flow of the refrigerant so that they can be used for the cooling purpose in the summers and for heating purpose in the winters. In summers the cooling coil of the air conditioner is located inside the room and the condenser outside the room while their functions are reversed in the winters as the machine acts as the heat pump. The roles of the condensers and the evaporators are reversed due to reversal in the flow of the refrigerant which is brought by the solenoid valve.

Service valves are devices that allow access to the sealed refrigeration system. The most economical way this is done is by crimping. This procedure is done at the factory. A small length of copper tubing is attached to the suction side and high side of the system. When the proper amount of refrigerant charge has been placed into the system, the tubing is crimped and soldered closed. When this is completed, there isn’t a way to get back into the system.

Dimension & Data of Castel Type Solenoid Valve:

Product video of 1070/5 Castel Type Solenoid Valve:

More Refrigeration Valve For you to choose:

Danfoss Type Solenoid Valve Ammonia Refrigeration Valve Castel Type Solenoid Valve

Refrigeration Solenoid Valve Coil Expansion Valve Refrigerator Solenoid Valve

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on