Pneumatic Actuated Ball Valve With Solenoid Valve Limit Switch
Pneumatic Actuated Ball Valve offered by BRANO helps to
automatically control the fluid flow using BRANO pneumatic rotary
actuator. BRANDO makes high quality Investment casted ball valves
with ISO 5211 mounting pad are very much suitable for direct
mounting of Pneumatic Actuator on Ball Valves. The Actuator used is
of Single acting and Double acting depending upon the application.
Single acting actuator is used where power fails causes valve to
close. On the other hand, Double acting actuator is used where
differential pressure on both the supply ports which leads to open
and close the valve.
Main components of ball valve include Body, Ball, Seat (PTFE,
RPTFE, CFT, Viton etc), Stem, Gland, and Lever. Ball valve is a
quarter turn valve which is operated by rotating the ball at its
axis to open and close the fluid flow. Ball Valve provides bubble
tight shutoff as it uses Soft seat for sealing. Also, the Ball
Valve is highly resistant to contaminated media as compared to
other valves. BRANO offers Ball valve in 2-Piece and 3- Piece
design available in Screwed , Socket and flanged end as per
international standards.
Technical Data of Pneumatic Ball Valve:
| |
Air Pressure: 0.4 to 0.8 MPa | Electric Actuator Power: 380VAC, 220VAC, 110VAC (50/60Hz), 24VDC Electric Actuator Input: 4-20mA. DC |
Control Medium: Neutral Gas, Air |
Ambient Temperature: -20 to +60℃ |
Medium Temperature: -20 to +180℃ UPVC Ball Valve: -10 to +45℃ CPVC Ball Valve: -15 to +90℃ |
Normal Seal's Working Temperature: PTFE (-20 to +180℃), TFM (-30 to
+230℃) |
Manufacturing Standard: GB, ISO, ANSI, BS, DIN |
Main Dimension of Pneumatic Ball Valve:
More Pneumatic Actuator Valves for you to choose:
| Pneumatic Ball Valves |
 |  |  |  |
 |  |  |  |
| Pneumatic Butterfly Valves |
 |  |  |  |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
