Stainless Steel 304 1.4 Meter Height Acrylic Color Optional Full
Height Sliding Turnstile
Product description
Full height sliding barrier is designed to control pedestrians
entering or exiting restricted areas, usually
used of high pedestrian traffic flow in both directions.
Intellgient sliding turnstile is the intelligent access management
produced by our company after several years
R & D , this equipment organically integrate machinery electronics
microprocessor control,and all kinds of different
reading and writing equipment. Through figuring all kinds of
different reading and writing equipment,and adopting
reliable performance safety protection devices real-time alarm
system, and direction indicator interface, realizing
the access intelligent control and management by the mutual
coordination.
The blocking body (gate wing) has a large area and a large blocking
height, which is perpendicular to the
ground and realized by telescoping Stop and release. The material
of the sliding gate is commonly used acrylic,
plexiglass, tempered glass, etc.
Model | SN-SLB02 |
Case Material | SS304, 1.2mm thickness |
Production Process | CNC Laser Cutting |
Size | 1200*330*980mm(Customization acceptable) |
Power input | AC100-240V,50/60HZ |
Operation voltage | DC24V, 3A, Power: 40W( Brushless Motor Optional) |
Electromagentic | Duty Cycle 100% |
Passage Width | 550mm |
Flap height | 1400mm(default) |
Flap Material | Acrylic |
Passage direction | Single directional/Bi-directional |
Operating time | 1S |
Throughput Rate | 30-40 persons/minute(Normally Closed) or 40 persons/(Normally Open) |
Reset Time after Power on | 3S |
MCBF | 5,000,000 Cycles |
Reset Time after failure | 10S |
Automatic Reset Function | Automatically locked within set time(Time Adjustable) |
Operation Humidity | 0~90%(No Freezing) |
Operation Temperature | -20℃~+60℃ |
Operation Eenvironment | Indoor,Outdoor(Shelter) |
Protection Level | IP45 |
Communication Interface | Standard RS485 interface, distance ≤1200 meters |
Input Interface | Relay switch signal or 12V electrical level signal or 12V pulse
signal of pulse width > 100ms, drive current >10mA |
High lights of our products
The body is made from brushed stainless steel which creates a
seamless and elegant access point to
blend into most indoor environment.
It can be integrated with any kind of access controller system
(e.g.: RFID device, Push button, Fingerprint
and Biometric device).
In case of emergency, the Optical Turnstile arm will open
automatically to allow free passage.
Optical Turnstiles are suit for elegant and luxury entrance
solutions.
MAIN FUNCTIONS AND FEATURES
1. With zero self-check function, it is convenient for users to
maintain and use.
2. Program operation mode of equipments through the little button
inside the main board.
3. Double Anti-Pinch function from both machine structure and
induction. Stops automatically if there is
something in the way during the return/rest of the doors. If there
is default time delay, it will have its second
return (till it comes back to where it should be), and the force is
very weak
4. Anti-rushing function: without having received the signal of
opening up, the doors lock automatically.
5. Doors can be adjusted into synchronization (only for
double-locks)
6. Automatic returning/resetting function: when the barriers open
up, if people do not pass by within the time
allowed, system will cancel the right of pass for this time.
7. Adjust it to normal open or normal closed to meet the different
requirements of different fields.
8. Can be linked to many kinds of card-reading equipments and work
when it has received the signal of
electricity relay switch.
9. One-way and two-way in and out control of passenger
10. Carry out distant control and management by directly operating
computer.
11. Automatic returning /resetting when there is time delay.
Normally speaking, it returns/resets five seconds
after its opening.
12. When the electricity is cut off, the access opens
automatically, and closes automatically when the electricity
is linked. Meet the requirements of fire-fighting.
13. Sound and lights alarming: including break-in and opposite
direction intrusion, and so on.
14. Counting function (optional)
15. Anti-Pinch function (four pairs of infrared)
Customized extended functions
1.Counting and alarm functions;
2. The material of the flap (retractable arm) is acrylic or soft
flap. The colors are red, black and blue.
The amount can be customized separately
3. Case material is mainly 304 stainless steel, other materials can
also be
customized
4.Remote control switch
5. Dynamic face recognition
6. Can add emergency escape function, in the case of special
emergency, start by remote button
7. The communication interface is mainly RS232 / RS485, other
interfaces
8.Box thickness standard 1.5mm can be customized 2.0mm
10. Fingerprint recognition of time attendance
11. QR code pass
