low clearance light European standard Single Girder Overhead Crane
Production description
European standard single girder overhead crane consists of one girder beam supported on each side by an end truck.
The electric hoist (electric wire rope hoist & electric chain
hoist)of European standard single girder overhead crane are underhung—meaning they run on the bottom flange of the European standard single girder overhead crane. 5 ~ 50t A4~ A6 European standard single beam bridge crane has light
weight, small wheel pressure, easy to operate and light, but it
still has powerful functions, multiple control modes, variable
speed, can undertake multiple tasks, reasonable design, low
clearance, easy installation, and effectively reduce the production
cycle and cost.European standard Single Girder Overhead Crane provide an ergonomic
way to move loads that would otherwise be difficult or awkward to
configure.European standard Single Girder Overhead Cranes are also built to
handle critical loads — from high-value equipment to containers of
harmful chemicals — and are thoroughly tested to ensure optimal
performance.
Depending on the specific application and load capacity, the
following European standard Single Girder Overhead Crane systems
can range in size, complexity, and operation. Regardless of style,
however, there are three universal parts for European standard
Single Girder Overhead Cranes:
- Bridge: The bridge is comprised of stationary or mobile rails that form a
parallel runway to carry one or more trolleys across it.
- Trolley: Running side to side across the bridge, this unit carries the
hoist.
- Hoist: The hoist is the mechanical device that hooks onto the load to
raise it. Hoists can also be used independently for vertical
lifting applications. The most common type, electric hoists, use
single-, double-, and variable-speed electric motors to lift
capacities ranging from 250 pounds to several hundred tons.
Product advantage Analysis
The European standard single-beam bridge crane adopts imported
configuration, new materials, and new finished products. It is a
new type of crane with light weight, generalization, energy saving
and environmental protection, and high technology content. It meets
international production standards and has light weight and obvious
increase in tonnage.
European standard single-girder bridge crane operating mechanism of
large and small vehicles adopts European technology three-in-one
transmission form, hard tooth surface reducer, compact structure,
low noise, no oil leakage, and long service life.
Due to the use of European-style compact trolleys and high-strength
materials, the European standard single-girder bridge crane is
small in size and light in weight. Compared with traditional
cranes, the height of the plant can be reduced under the same
lifting height, effectively reducing the cost of the plant.
Compact structure, modular design, small headroom, small size,
large working range, effectively improving production efficiency.
Full frequency conversion control, stable operation, no impact,
slow heavy load, fast light load, energy saving and consumption
reduction.
European standard single girder overhead crane selection instructions
1. The working level of the European standard single girder overhead crane is A5 (FEM 2m), without auxiliary hook. Customers can put forward
corresponding requirements according to their own needs, and you
can achieve higher work level and function through customized European standard single girder overhead crane.
2. The European standard single girder overhead crane can also add auxiliary lifting mechanism and the setting value of
double speed under light load. Generally, the primary and secondary
settings are 4:1, which can also be set according to customer
requirements. Due to the action of the auxiliary hook, the total
weight and wheel pressure of the European standard single girder overhead crane will increase.
3. When the customer's requirements of European standard single girder overhead crane is change, such as working level, speed, lifting height, the
corresponding parameters, size, weight, wheel pressure, etc. will
also change. The actual parameters, quality and wheel pressure meet
the contract requirements.
4. The lifting speed and Trolley Speed listed of European standard single girder overhead crane in the table are standard values, which can be adjusted according
to the needs of customers.
5. Technical parameters and dimensions of European standard single girder overhead crane will be changed due to technical improvement or upgrading.
European standard single girder overhead crane is typically less expensive due to:
1. Reduction in freight expenses
2. Faster installation
3. Simpler hoist and trolley design
Lighter runway beams
Safety Features of European standard single girder overhead crane:
Weight overload protection device, top quality durable polyurethane
buffer, crane travelling limit switch, low voltage protection
function, emergency stop system, current overload protection
function.
Product picture of European standard single girder overhead crane:
When you send us inquiry of European standard single girder overhead crane, plese try to give us the basic technical data as fellow:
| Lifting Capacity | _____T |
| Lifting Height | ______m |
| Electricity | __V__HZ__Phase |
| Span | _____m |
| Travelling Distance | _____m |
| Control Type | Pendant button, wireless remote control or driver's cab operation |
If you are interested in this European standard single girder overhead crane, you can contact us by email
