Home > General Mechanical Components Design Services >

Air Dust Proof Valve 3/4 " 1 " Pulse Jet Valve Pneumatic Two way Indsutry cement factory application

Air Dust Proof Valve 3/4 " 1 " Pulse Jet Valve Pneumatic Two way Indsutry cement factory application

Ask Lasest Price
Brand Name :	NBSANMINSE
Model Number :	QD - Z - 20 / 25
Certification :	ISO9001
Price :	Negotiation
Payment Terms :	L/C,T/T
Supply Ability :	10000PCS
Delivery Time :	5-30days

Add to Cart

Product Details
Company Profile

Air Dust Proof Valve 3/4 " 1 " Pulse Jet Valve Pneumatic Two way Indsutry cement factory application

QD - Z - 20 / 25 Series Electromagnetic Pulse Vave GOYEN Replace Right Angle Air Dust Proof Valve 3 / 4 " , 1 "

Usage

Electromagnetic valve ( Also called diaphragm valve ) is the” switch “for compressed air in the dust clean blowing system of the pulse bag filter . Controlled by the output signals of the pulse jet control device , it makes dust clean to the filter bags cell by cell to keep the resistance of thebaghouse within the set range and thus guarantee the processing functions and the dust collecting efficiency of the baghouse .

Z type electromagnetic pulse valves is a right angle valve , with the 90 degree , angle between the inlet and outlet , which is suitable for the installation connection between the gas dome and the baghouse blow tube provide good air flow and dust clean pulses satisfying the requirements .

Working Principle

The electrical signals from the pulse jet control device move the armature of the electromagnetic pulse valve . The air escape of the back gas cell opens and the back bag gas cell loses pressure quickly , thus the diaphragm moves back and the compressed air blows through the valve outlet . The electromagnetic pulse valve comes into the “open” condition .

Material Construction

Body	ADC12 die cast
Armature	430FR stainless steel
Diaphragm	Nitrile or viton
Spring	321 Stainless steel
Fasteners	302 Stainless steel

Good Quality membranes shall be selected and used fo all the valves , with each part checked in each manufacturing procedure , and put into the assembly ling conforming to all the procedures . Every finished valve shall be taken the electriferous blowing test .

Common failure and troubleshooting

Use period	Failure phenomena	Possible Reason	Troubleshooting
During installation and commissioning	The valves cannot all be opened, but the leading part does act.	Check the gas dome pressure to see if it is too low.	Check the leakage
	Some valves do not work, but the others are normal.	Check the valve coil connection and coil	Replace the accessories
	The valves cannot all be closed. There is leakage. There is no way to establish a gas dome.	Y-valve. Some valves for the same gas dome are leaking, thus causing leakage for all the valves.	Check the leakage
		Z-valve. The valve inlet and blowing muzzle are installed backwards.	Re-install
	Some valves cannot be closed. There is leakage.	There is some dirt or debris on the membrane, ii is blocking the moving iron core.	Clean the membrane and check that the membrane is complete. Check the moving iron core and air lock.
	A valve closing is slowly.	The membrane orifice is blocked.	Dredge the membrane orifice
During use period	Some valves are leaking. The membrane cannot close tightly and the valve is always open a little.	There is some dirt or debris on the membrane, the leading part is damaged. Moving iron core is blocked.	Clean the membrane and check that the membrane piece is complete. Check the moving iron core and the air lock. Replace the accessories if necessary.
	Coil is hot and burned out.	It has been turned on for too long.	Check the working condition of the control system.
	Voltage exists but the valve does not operate.	Membrane is damaged and the orifice is blocked.	Replace the accessories in time.
	Ambient temperature is below -20℃. The valve is leaking and cannot open.	Ambient temperature is too low and here is frost in the valve.	Pay attention to insulation and maintaining proper temperatures.

Product Tags:

Verified Supplier

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Send your message to this supplier

*From:
Your email address is incorrect!
To: Ningbo Sanmin Import And Export Co.,Ltd.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories

Air Dust Proof Valve 3/4 " 1 " Pulse Jet Valve Pneumatic Two way Indsutry cement factory application

Air Dust Proof Valve 3/4 " 1 " Pulse Jet Valve Pneumatic Two way Indsutry cement factory application

Air Dust Proof Valve 3/4 " 1 " Pulse Jet Valve Pneumatic Two way Indsutry cement factory application

electromagnetic pulse valve

pulse air valve

Air Dust Proof Valve 3/4 " 1 " Pulse Jet Valve Pneumatic Two way Indsutry cement factory application

You May Like

Double Diaphragm Pulse Valve Solenoid Pulse Valve QG-Z-50S / 62S / 76S Series GOYEN Type

SANMIN QA-40S 50S 60S AC 220 Volt Pneumatic Pulse Valve 0.3-0.6Mpa ASCO type Dust proof solenoid valve baghouse valve

QA-Y- 76S Pneumatic Pulse Valve Big Size Submerged type Dust Proof Valve Asco type

SANMIN Pneumatic Pulse Valve Dustproof Valve Clean Air 1 - 1 / 4 " ASCO Type

Double Diaphragm Pulse Valve Pulse Jet Solenoid Valve 24VDC / 110VAC SBFEC Type


*From:	Your email address is incorrect!
*To:	Ningbo Sanmin Import And Export Co.,Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!