DC 24 Volt Ball Hydraulic Solenoid Valve Normally Open / Closed
23QDF 24QDF
Introduction
1 . The 23QDF6 and 24QDF6 solenoid ball valves are used in 2 - way
cartridge valve assemblies with minerals as working medium , to
realize pilot control of leaks . While satisfying the need of
pressure drop and flow control , they may also serve to control the
directions of other actuators .
2 . The W23QDF6 and W24QDF6 ball type solenoid reversing valves are
manufactured using anticorrosive marerial and special workmanship ,
hence suitable for working with non - mineral oil mediums such as
emuilsified liquid , high - water - based hydraulic oil , and ecen
suitable for working in pneumatic conreol units .
Model Designation
1 . For use at ambient temperature – 20 ~ + 40 ℃ , relative
humidity ≤ 95 % , and with no exposure to weathering or explosive
gas .
2 . The magnet is intended for long- term working .
3 . Rated reversing rate of solenoid valve is 120 times / min when
power continuity rate is 60 % .
4 . Range of variation in working voltage of magnet is + 60 % ~ -15
% of rated working voltage .
5 . Reliable reversing for 2 × 104 times under given conditions .
1 ) Under the load of rate working pressure ;
2 ) When working under rate working voltage ;
3 ) Under power continuity rate of 60 % and reversing rare of valve
is 120 times / min ;
4 ) Under ambient temperature of 40 ℃
Main Technical Data
| Nominal Diameter | 6mm |
| Rated Working Pressure | 200 , 315 × 105Pa |
| Applicable Working Medium | Mineral Oil , Emulsified Oil , High – Water – Based Liquid |
| Viscosity and fineness of hydraulic oil | Viscosity 10 ~ 350 , filter fineness ＜ 25u |
| Rated working voltage | 24V . DC |
| Weight | ~ 1 . 2 kg |
When ordering , the buyer must indicate the description , model ,
plug mechanism , rated working pressure and order quantity . The
letter " W " must be added before the model designation if the
valve is required to work with non - mineral oil mediums ( such as
emulsified liquid and high - water - based liquid )
