SG Type SO Quantitative Pressure Measurement 1.0MPa - 2.0 MPa
Working Pressure
Performance and characteristics
. Also known as the positive displacement, pressure relief action
type, is driven by the lubrication pump pressure oil measurement
within the piston, put the oil in the tank meanwhile indicating
stretched out, when the system after unloading, Piston under the
action of the spring will let indoor to lubrication oil forced
pressure points, indication rod back at the same time.
. System must be intermittent work, and the pump must be support
the function of lubricating unloading.
. Lubrication pump in one working day cycle, each of the oil outlet
oil only once, and no impact of displacement with the measurement
of the distance between each other is far, close, down, high, down,
lying or stand.
. Accurate measurement, quick action, oil discharge unobstructed,
check calve to prevent the oil reverse flow
. According to all lubricating points and distribution of select
corresponding measurement, SMG type and SDB type free combination,
SMO and SDBR model free combination
. Measuring oil outlet pipe diameter of Φ 4, tubing connectors with
the PA4 hollow nail and the self-contained PB4 double taper ferule
plus model after T
| Project | Dimension | Oil | Working pressure ( Mpa ) | Rated capacity ( Ltimes ) | Mark |
|
| Model | L ( mm ) | S |
| SMG-3 | 48.5 | 11 | Thin oil | 1.0-2.0 | 0.03 | 3 |
| SMG-6 | 0.06 | 6 |
| SMG-10 | 0.10 | 10 |
| SMG-20 | 58 | 0.20 | 20 |
| SMG-30 | 0.30 | 30 |
| SMG-50 | 0.50 | 50 |
| SMO-3 | 44.5 | 0.03 | 3 |
| SMO-6 | 0.06 | 6 |
| SMO-10 | 0.10 | 10 |
| SMO-20 | 53.5 | 0.20 | 20 |
| SMO-30 | 0.30 | 30 |
| SMO-50 | 65 | 0.50 | 50 |
